C.A. Tech P200C-18-2064T Spray Gun
C.A. TECHNOLOGIES PANTHER 200C CORROSION CONTROL SPRAY GUN
C.A. Technologies P200C-18-2064T Panther 200C Conventional Spray Gun combines a 1.8 mm fluid nozzle with the PTFE-coated 22-2064T pressure-feed air cap, delivering powerful atomization for heavy, high-solids corrosion-control coatings in demanding industrial finishing environments.
This Panther 200C is manufactured by C.A. Technologies, not Titan Tool. The 1.8 mm / 22-2064T pressure-feed configuration is intended for heavy coating service and requires approximately 22 SCFM at the manufacturer's suggested 80 PSI gun inlet pressure.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | P200C-18-2064T is a C.A. Technologies Panther 200C conventional air spray gun configured for pressure-feed operation with a 1.8 mm (.070-inch) fluid nozzle and 22-2064T air cap. The P200C platform is engineered for corrosion-control work and harsh industrial spraying environments. |
| Function | The gun receives coating from a compatible pressurized fluid source and combines it with compressed atomizing air. The 1.8 mm fluid setup and high-airflow 2064T cap provide the break-up power needed for heavy and high-solids materials while allowing the operator to regulate material flow and spray-pattern width at the gun. |
| Industrial Applications | Designed for general corrosion-control spraying and other demanding industrial finishing applications involving heavy, high-solids coatings. Typical work can include protective primers and compatible industrial coatings applied to fabricated steel, machinery, structural components, equipment and other metal assemblies. |
| Accurate Compatible Titan Machines | P200C-18-2064T is not a Titan-manufactured gun and no model-specific Titan sprayer fitment is established for this configuration. It is a complete C.A. Technologies conventional pressure-feed spray gun that operates with a suitable compressed-air supply and compatible pressurized fluid-delivery system. |
| Accurate Part Number | C.A. Technologies P200C-18-2064T — Panther 200C conventional pressure-feed spray gun, 1.8 mm fluid nozzle and 22-2064T PTFE-coated air cap. This configuration should not be confused with P200C-18Z-2064T, which uses the specialized 1.8 mm Delrin-tipped zinc configuration. |
| Compatible Parts & Assemblies | The 1.8 mm configuration uses a 1.8 mm (.070-inch) fluid nozzle with the matching 40-1218 needle. The 22-2064T is the PTFE-coated version of the pressure-feed 2064 air-cap family. The broader P200C platform supports multiple pressure- and siphon-feed air caps and fluid sizes for different coating viscosities. |
| Related Parts Commonly Serviced Together | Inspect the 1.8 mm fluid nozzle and matching needle together when wear affects fluid shutoff or spray quality. Related service points include the 22-2064T air cap, 60-1500 fan control, 22-1001 air-cap ring, fluid packing, trigger, air valve and fluid-control components. Current supplier documentation identifies repair kit 10-110 for the P200C; older C.A. Technologies catalogs list 10-106, so verify the gun revision before ordering a repair kit. |
| Common Problems Solved | The Panther 200C addresses applications where lighter finishing guns may not provide sufficient atomization energy for heavy high-solids coatings. Its corrosion-control-oriented construction, powerful conventional atomization and serviceable fluid components make it suitable for demanding protective-coating environments. |
| Use with Coating Systems | Use with a compatible pressure-feed material supply and adequately sized compressed-air system. For the 1.8 mm / 22-2064T configuration, C.A. Technologies specifies approximately 22 SCFM and an 80 PSI suggested gun inlet pressure. Actual operating pressure should be adjusted to the coating and required atomization. |
| OEM & Brand Information | P200C-18-2064T is manufactured by C.A. Technologies, not Titan Tool. The Panther 200C weighs approximately 20 ounces and has a 1/4-inch NPS male air inlet, 3/8-inch NPS male fluid inlet and hard-coated gun body. It is a conventional air spray gun, not an HVLP or airless spray gun. |
| Commercial Benefits | The P200C-18-2064T gives corrosion-control professionals a defined 1.8 mm pressure-feed configuration with the high-airflow 2064T cap. Its ability to atomize heavy high-solids coatings, rugged Panther construction and broad service-parts platform make it a practical production gun for industrial protective-finishing operations. |
Contractor Selection Insight
Choose P200C-18-2064T when you need the Panther 200C's general corrosion-control capability with a 1.8 mm pressure-feed setup for heavy coatings. The 2064T cap has substantial air demand—approximately 22 SCFM at the suggested 80 PSI inlet—so compressor capacity should be confirmed before purchase. For zinc-rich coatings where plating resistance is the primary concern, compare the separate P200Z or P200C 18Z configurations before selecting this standard 18 setup.
FAQ Section
Key answers for professionals selecting the P200C-18-2064T Panther 200C.
No reviews yet. Be the first to review this product!