C.A. TECH L100H-15-1093 Spray Gun
C.A. TECHNOLOGIES LYNX 100H LOW-CFM HVLP SPRAY GUN
C.A. Technologies L100H-15-1093 Lynx 100H HVLP Spray Gun combines a 1.5 mm stainless-steel fluid setup with the 21-1093 pressure-feed air cap, delivering a 12-inch maximum pattern with only 10 SCFM for efficient professional finishing.
Manufactured by C.A. Technologies rather than Titan Tool, this pressure-feed Lynx 100H configuration uses the 31-0215 1.5 mm nozzle, 40-1100 needle and 21-1093 air cap. The 1093 cap requires approximately 10 SCFM at a maximum 18 PSI gun inlet pressure for HVLP operation.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | L100H-15-1093 is a C.A. Technologies Lynx 100H industrial general-purpose low-CFM HVLP pressure-feed spray gun. This configuration combines a 1.5 mm (.059-inch) fluid nozzle with the 21-1093 air cap, providing an efficient setup for medium-viscosity professional finishing materials. |
| Function | A separate pressure-feed system supplies coating to the fluid nozzle while compressed air through the 21-1093 cap atomizes the material. The 1093 cap provides a maximum pattern width of approximately 12 inches and requires only about 10 SCFM, helping the Lynx 100H operate with less compressor demand than many higher-air-consumption production guns. |
| Industrial Applications | The 1.3, 1.4 and 1.5 mm nozzle sizes paired with the 1093 air cap are recommended by C.A. Technologies for medium-viscosity materials in the 21–30 second Zahn #2 range, including automotive base coats, enamels, primers, epoxies, urethanes and automotive clear coats. The wider L100H platform also covers stains, dyes, lacquers, sealers and heavier coatings with alternate setups. |
| Accurate Compatible Titan Machines | L100H-15-1093 is not a Titan-manufactured replacement component and no specific Titan sprayer fitment is established. It is a complete C.A. Technologies pressure-feed HVLP gun that requires a compatible pressurized coating supply and compressed-air source. Titan OEM machine compatibility should not be inferred from its presence in a Titan-related catalog or sales channel. |
| Accurate Part Number | C.A. Technologies L100H-15-1093 — Lynx 100H pressure-feed HVLP spray gun with 1.5 mm fluid nozzle and 21-1093 air cap. C.A. Technologies offers other L100H-15 configurations with different air caps, so the complete 1093 suffix is important when matching the required atomization characteristics. |
| Compatible Parts & Assemblies | This configuration uses the 31-0215 1.5 mm (.059-inch) fluid nozzle tip, 40-1100 needle marked 100, 21-1093 HVLP air cap, 21-1001 air-cap ring and 60-1502 #2 fan-control assembly. The modular L100H platform supports fluid-nozzle sizes from 0.5 mm through 1.7 mm with matched air caps for different material viscosities. |
| Related Parts Commonly Serviced Together | When spray quality or shutoff deteriorates, inspect the 31-0215 fluid tip, 40-1100 needle and 21-1093 air cap together. Related service components include the 21-1001 retaining ring, 60-1502 fan control, 60-1400 needle seal cartridge, 60-1520 air valve assembly, trigger, air control and needle return spring. Repair kit 10-106 is specified for the L100H. |
| Common Problems Solved | The Lynx 100H addresses professional finishing jobs where conventional compressor demand is undesirable. Its low-CFM architecture allows useful HVLP atomization with comparatively modest air consumption, while stainless-steel fluid passages, replaceable fluid setups and adjustable controls support repeatable production and onsite finishing. |
| Use with Coating Systems | This configuration is pressure-fed and requires a separate compatible pressure pot, pump or other pressurized fluid source. The 21-1093 air cap requires approximately 10 SCFM and has an 18 PSI maximum gun inlet pressure for HVLP operation. With a 1.5 mm nozzle, C.A. Technologies places this combination in its medium-viscosity coating range. |
| OEM & Brand Information | L100H-15-1093 is manufactured by C.A. Technologies, not Titan Tool. The Lynx 100H weighs approximately 20 ounces and uses a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet. Stainless-steel fluid passages and lightweight rugged construction support both onsite and production applications. |
| Commercial Benefits | The L100H-15-1093 combines a versatile 1.5 mm fluid setup with only 10 SCFM air demand, helping shops achieve professional HVLP finishing without requiring an exceptionally large compressor. Its modular nozzle system, replaceable wear components, stainless fluid path and broad material range make the Lynx 100H a practical production and field-finishing platform. |
Contractor Selection Insight
Choose L100H-15-1093 when you need a 1.5 mm pressure-feed HVLP setup for medium-viscosity materials but want to keep compressor demand relatively low. The 1093 cap requires approximately 10 SCFM at no more than 18 PSI gun inlet pressure and can produce a pattern up to about 12 inches. For heavier high-solids materials, move to the appropriate higher-flow L100H air-cap and nozzle combination instead of simply increasing pressure beyond the 1093 specification.
FAQ Section
Key answers for professionals selecting the L100H-15-1093 Lynx 100H.
No reviews yet. Be the first to review this product!