C.A. TECH J100C-15-2266-401 Spray Gun
C.A. TECHNOLOGIES JAGUAR 100C CONVENTIONAL SPRAY GUN
C.A. Technologies J100C-15-2266-401 Jaguar 100C Conventional Spray Gun combines a 1.5 mm stainless-steel nozzle, 21-2266 air cap, 700 mL aluminum gravity cup, and 12 SCFM air requirement for professional medium-viscosity coating applications.
Manufactured by C.A. Technologies rather than Titan Tool, this Jaguar 100C configuration uses nozzle 31-0615 with the 21-2266 conventional air cap. It produces up to an approximately 12-inch pattern, requires about 12 SCFM, and is suited to medium-viscosity materials including base coats, enamels and epoxies.
C.A. TECHNOLOGIES JAGUAR 100C CONVENTIONAL GRAVITY SPRAY GUN
C.A. Technologies J100C-15-2266-401 Jaguar 100C Conventional Spray Gun
Handle demanding professional finishing with C.A. Technologies J100C-15-2266-401, a Jaguar 100C conventional gravity-feed spray gun configured with a 1.5 mm stainless-steel nozzle, 21-2266 air cap, and 700 mL aluminum cup for controlled atomization of medium-viscosity coatings.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | J100C-15-2266-401 is a C.A. Technologies Jaguar 100C conventional gravity-feed spray gun. The exact configuration combines a 1.5 mm 17-4PH stainless-steel fluid nozzle, 21-2266 conventional air cap and 700 mL aluminum gravity cup. The Jaguar 100C is engineered as a general-purpose conventional platform with strong coating break-up capability. |
| Function | Coating flows from the top-mounted gravity cup through the stainless-steel fluid circuit while compressed air through the 21-2266 air cap atomizes the material. Fluid output is primarily controlled through correct orifice selection and fine-tuned with the fluid-control knob; the fan-control knob adjusts spray width for the workpiece. |
| Industrial Applications | C.A. Technologies classifies the 1.5 mm nozzle with 2266 air cap for medium-viscosity materials in approximately the 21–30 second Zahn #2 range. Typical applications include automotive base coats, enamels, primers, epoxies, urethanes and automotive clear coats. The broader Jaguar 100C family also supports heavier coatings and gelcoat through larger matched setups. |
| Accurate Compatible Titan Machines | J100C-15-2266-401 is not manufactured by Titan Tool and has no verified model-specific Titan sprayer fitment. It is a complete C.A. Technologies gravity-feed conventional spray gun requiring a suitable regulated compressed-air source. It does not require a Titan airless pump or separate pressure-feed material pump for normal operation. |
| Accurate Part Number | C.A. Technologies J100C-15-2266-401. The model code identifies the Jaguar 100C platform, 1.5 mm stainless-steel nozzle and 21-2266 air cap. The -401 suffix identifies the configuration supplied with the 51-401 700 mL aluminum gravity cup. |
| Compatible Parts & Assemblies | The 1.5 mm configuration uses fluid nozzle 31-0615 and the 21-2266 air cap. The Jaguar 100C uses 60-1500 fan control and an air-cap retaining ring. The 51-401 700 mL aluminum cup is standard with this -401 configuration; 51-403 1000 mL aluminum and 51-400 700 mL plastic cups are available alternatives for compatible gravity-feed use. |
| Related Parts Commonly Serviced Together | Inspect the 31-0615 fluid nozzle, corresponding fluid needle and 21-2266 air cap together whenever atomization, pattern quality or fluid shutoff deteriorates. Also inspect the 60-1500 fan control, needle packing, air valve, trigger, fluid-control assembly and cup sealing components. C.A. Technologies specifies repair kit 10-105 for the Jaguar 100C. |
| Common Problems Solved | This configuration provides professional conventional atomization for coatings requiring more material delivery than smaller fine-finish nozzle setups. The 1.5 mm opening handles medium-viscosity materials, while the 2266 cap provides an approximately 12-inch maximum pattern. Stainless-steel fluid passages support durable service with compatible professional coatings. |
| Use with Coating Systems | Use with clean, dry and regulated compressed air. The 21-2266 conventional air cap requires approximately 12 SCFM and produces up to an approximately 12-inch spray pattern. Gun inlet pressure can be adjusted to the application, coating viscosity and finish requirement. Proper nozzle selection should be used as the primary fluid-flow match before final control adjustments. |
| OEM & Brand Information | J100C-15-2266-401 is manufactured by C.A. Technologies, not Titan Tool. The Jaguar 100C is a conventional air spray gun—not HVLP and not airless. It features stainless-steel fluid passages, a 1/4-inch NPS male air inlet and 16 mm x 1.5 mm male gravity fluid inlet. Manufacturer literature lists approximately 25 ounces for the complete gun configuration in its current catalog. |
| Commercial Benefits | The J100C-15-2266-401 combines a practical 1.5 mm fluid opening, 12-SCFM conventional air cap and reusable 700 mL aluminum cup in one professional package. Its modular Jaguar platform allows different nozzle and air-cap combinations to be installed when coating requirements change, reducing the need to purchase a completely separate spray gun for every material class. |
Contractor Selection Insight
Choose J100C-15-2266-401 when you need a gravity-feed conventional gun for medium-viscosity materials and want a versatile 1.5 mm setup with a reusable 700 mL aluminum cup. The 2266 cap uses about 12 SCFM and provides up to a 12-inch pattern. For heavy high-solids coatings or gelcoat, select the appropriate larger Jaguar 100C nozzle and higher-output air-cap configuration rather than forcing heavy material through this medium-viscosity setup.
FAQ Section
Key answers for professionals selecting the J100C-15-2266-401 Jaguar 100C.
No reviews yet. Be the first to review this product!