Titan H20-C411F Spray Gun
C.A. TECHNOLOGIES H2O COUGAR AIR ASSIST AIRLESS GUN
C.A. Technologies H20-C411F H2O Cougar Spray Gun is a waterborne air-assist airless finishing gun equipped with a 36-411F Opti-Tip. Its .011-inch orifice, 40-degree spray angle, stainless-steel fluid passages, and approximately 8-inch pattern support professional fine-finish coating applications.
This product is manufactured by C.A. Technologies rather than Titan Tool. The H2O Cougar configuration is intended for waterborne finishing and combines high-pressure fluid delivery with low-volume atomizing air for controlled professional finishing.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | The H20-C411F is a C.A. Technologies H2O Cougar full-size Air Assist Airless spray gun configured for waterborne finishing. It is supplied in the 411F configuration with the 36-411F fine-finish Opti-Tip, .011-inch orifice, 40-degree spray angle and approximately 8-inch pattern. |
| Function | Air Assist Airless technology uses pressurized fluid for primary atomization while controlled compressed air at the air cap assists pattern formation and finish quality. The H2O configuration is engineered around waterborne finishing requirements, while the 411F Opti-Tip provides fine-finish atomization with controlled material delivery. |
| Industrial Applications | Designed for professional waterborne fine finishing on applications such as wood products, cabinetry, furniture, millwork and compatible metal-finishing work. The .011-inch fine-finish configuration is suited to compatible lacquers, enamels, waterborne topcoats and other coatings approved by their manufacturer for this tip and spray technology. |
| Accurate Compatible Titan Machines | H20-C411F is not a Titan OEM spray-gun part and should not be represented as a factory Titan gun. It is a C.A. Technologies spray gun intended for compatible Air Assist Airless finishing systems capable of supplying the required regulated fluid and atomizing air. Any use with Titan equipment must be verified by pressure, hose, connection and system requirements rather than assumed from the listing name. |
| Accurate Part Number | C.A. Technologies H20-C411F. The gun uses the 36-411F Opti-Tip with a .011-inch orifice and 40-degree spray angle, producing an approximately 8-inch spray pattern under the manufacturer's reference configuration. |
| Compatible Parts & Assemblies | Key documented components include the 36-411F fine-finish Opti-Tip and integrated 100-mesh fluid filtration. C.A. Technologies identifies 66-125 as the standard 100-mesh filter, 10-127 as the seal repair kit and 10-113 as the complete repair kit for the Cougar configuration. |
| Related Parts Commonly Serviced Together | During gun service, inspect the 36-411F tip, air cap and atomization surfaces, 100-mesh fluid filter, seals, needle-related wear components, fluid passages, trigger mechanism, fluid hose and atomizing-air supply components. Correct filtration is particularly important for protecting fine-finish tip performance. |
| Common Problems Solved | A correctly configured H20-C411F provides controlled atomization for professional waterborne finishing where conventional airless spraying may not provide the desired finish control. The 36-411F Opti-Tip is designed to optimize atomization and is promoted for reducing micro-bubble issues encountered with certain primers and waterborne coatings. |
| Use with Coating Systems | The H2O Cougar is specifically configured for waterborne coating applications. The 411F configuration is associated with fine lacquers, enamels and waterborne topcoats. Always match coating viscosity and solids to the .011-inch tip and follow the coating manufacturer's pressure, reduction, filtration and atomization recommendations. |
| OEM & Brand Information | The manufacturer is C.A. Technologies. H20-C411F belongs to the company's H2O Cougar Air Assist Airless waterborne spray-gun family and is made in the USA. It should not be described as a genuine Titan OEM spray gun simply because it may be sold through a Titan-focused parts catalog or used with compatible finishing equipment. |
| Commercial Benefits | The H20-C411F combines stainless-steel fluid passages, integrated filtration, an ergonomic full-size Cougar gun body and fine-finish 411F Opti-Tip. For professional waterborne finishing operations, this combination supports controlled atomization, repeatable pattern performance and serviceable production-gun construction. |
Contractor Selection Insight
Choose H20-C411F when your finishing process uses compatible waterborne coatings and requires the control of an Air Assist Airless gun with a fine .011-inch opening and approximately 8-inch pattern. The “F” identifies the fine-finish Opti-Tip configuration. For higher material delivery, select another H2O Cougar tip size only after matching its orifice and pattern to the coating manufacturer's requirements.
FAQ Section
Key answers for professionals selecting the H20-C411F H2O Cougar.
No reviews yet. Be the first to review this product!