C.A. TECH EP-JSLP-W Spray Gun
C.A. TECHNOLOGIES JAGUAR SLP WOOD FINISHING E-PACK
C.A. Technologies EP-JSLP-W Jaguar SLP HVLP Spray Gun Kit is a professional wood-finishing E-Pack with four needle/nozzle setups, two air caps, an aluminum gravity cup, and low-pressure 12-point atomization designed for stains, sealers, clear finishes, and other fine-finish coatings.
EP-JSLP-W is manufactured by C.A. Technologies, not Titan Tool. The Jaguar SLP uses stainless-steel fluid passages and a 12-point balanced plenum for fine HVLP atomization. This wood-finishing E-Pack includes an aluminum gravity cup rather than the 3M PPS system supplied with PPS-designated versions.
C.A. TECHNOLOGIES JAGUAR SLP WOOD FINISHING E-PACK
C.A. Technologies EP-JSLP-W Jaguar SLP HVLP Spray Gun Kit
Bring controlled low-pressure atomization to professional wood finishing with C.A. Technologies EP-JSLP-W, a Jaguar SLP gravity-feed HVLP E-Pack combining four fluid setups, two air caps, an aluminum gravity cup, and the manufacturer's 12-point balanced plenum design for precise fine-finish application.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | EP-JSLP-W is the wood-finishing E-Pack built around the C.A. Technologies Jaguar SLP gravity-feed HVLP spray gun. The verified package includes four needle/nozzle setups—1.0, 1.3, 1.5 and 1.9 mm—two air caps and an aluminum gravity cup, providing multiple configurations for professional wood-finishing materials. |
| Function | The Jaguar SLP uses gravity-fed coating and regulated compressed air to produce HVLP atomization. Its 12-point balanced plenum distributes atomizing air around the fluid stream to produce a more uniform particle pattern. The gun requires approximately 29 PSI at the inlet to produce approximately 10 PSI at the nozzle while consuming about 13.5 CFM. |
| Industrial Applications | The “W” designation identifies this E-Pack for wood finishing. C.A. Technologies specifically identifies the Jaguar SLP for fine-finish work including NGR materials, toner stains and applications requiring consistent color matching. Its nozzle-selection chart also covers stains, dyes, sealers, primers, epoxies, clear coats and high-solids clears when the correct matched setup is installed. |
| Accurate Compatible Titan Machines | EP-JSLP-W is not manufactured by Titan Tool and has no verified model-specific Titan machine fitment. It is a complete C.A. Technologies compressed-air gravity-feed spray-gun package. Operation requires clean, regulated shop air with sufficient CFM capacity; it is not a replacement gun for a Titan airless sprayer or turbine HVLP system. |
| Accurate Part Number | C.A. Technologies EP-JSLP-W. “EP” identifies the E-Pack configuration, “JSLP” identifies the Jaguar SLP HVLP platform, and “W” identifies the wood-finishing package. The absence of a “PPS” suffix distinguishes this aluminum gravity-cup version from PPS-equipped Jaguar SLP packages. |
| Compatible Parts & Assemblies | The Jaguar SLP platform supports matched nozzle kits from 0.8 through 2.2 mm. Verified examples include JK1310 with 1.0 mm tip 33-0210, air cap 23-1310 and needle 40-1310; JK1313 with 1.3 mm tip 33-0213, cap 23-1313 and needle 40-1313; JK1315 with 1.5 mm tip 33-0215, cap 23-1315 and needle 40-1315; and JK1319 with 1.9 mm tip 33-0219, cap 23-1319 and needle 40-1319. |
| Related Parts Commonly Serviced Together | When atomization, pattern consistency or fluid shutoff changes, inspect the installed fluid tip, matching needle and corresponding air cap together. Other service areas include the air-cap retaining assembly, fluid-control components, fan control, trigger, needle seal and air valve. The aluminum gravity cup, lid, vent and sealing surfaces should also be inspected for leakage or contamination. |
| Common Problems Solved | The Jaguar SLP is designed for controlled fine-finish atomization at relatively low inlet pressure. C.A. Technologies specifically promotes the SLP platform for reducing finishing defects such as haloing and mottling in stain and toner applications. Multiple fluid setups also let finishers match material viscosity more accurately instead of attempting to compensate with excessive pressure or fluid-control restriction. |
| Use with Coating Systems | Use with clean, dry and regulated compressed air capable of sustaining approximately 13.5 CFM at 29 PSI. The manufacturer's selection chart pairs 1.0 mm with very thin materials such as stains and dyes; 1.3–1.4 mm with base, clear and single-stage coatings; 1.4–1.5 mm with high-solids clears; and 1.4–1.7 mm with sealers, primers and epoxies. Material-specific setup should always be confirmed before spraying. |
| OEM & Brand Information | EP-JSLP-W is manufactured by C.A. Technologies, not Titan Tool. The Jaguar SLP is a professional gravity-feed HVLP spray gun with stainless-steel fluid passages, a 1/4-inch NPS male air inlet and 16 mm x 1.5 mm male fluid inlet. Current manufacturer information lists approximately 20 ounces for the gun and 13.5 CFM air consumption at 29 PSI. |
| Commercial Benefits | Professional wood finishers receive four fluid setups and two air caps in one application-focused package, giving one Jaguar SLP platform a broad working range. Its low-pressure HVLP design, stainless-steel fluid path and 12-point air diffusion make it particularly useful for controlled stain, toner and fine-finish work where consistent color and smooth atomization are commercially important. |
Contractor Selection Insight
Choose EP-JSLP-W when stain, toner and other fine wood finishes demand controlled atomization and consistent color rather than maximum material output. The 1.0 mm setup is particularly useful for thin stains and dyes, while the larger included setups broaden the gun's coating range. Make sure your compressor can continuously deliver approximately 13.5 CFM at 29 PSI—this is a low-pressure HVLP gun, but it still requires substantial airflow.
FAQ Section
Key answers for professionals selecting the EP-JSLP-W Jaguar SLP E-Pack.
No reviews yet. Be the first to review this product!