C.A. TECH EP-JSLP-A-PPS Spray Gun
C.A. TECHNOLOGIES JAGUAR SLP AUTOMOTIVE HVLP E-PACK
C.A. Technologies EP-JSLP-A-PPS Jaguar SLP HVLP Spray Gun Kit is an automotive fine-finishing E-Pack with 1.3, 1.5, and 1.9 mm needle/nozzle setups, two air caps, a 650 mL 3M PPS cup, three lids and liners, and service tools.
This E-Pack is manufactured by C.A. Technologies, not Titan Tool. The Jaguar SLP uses stainless-steel fluid passages and 12-point air diffusion for fine HVLP atomization. It requires approximately 13.5 CFM at 29 PSI and is configured here for professional automotive finishing.
C.A. TECHNOLOGIES JAGUAR SLP AUTOMOTIVE HVLP E-PACK
C.A. Technologies EP-JSLP-A-PPS Jaguar SLP HVLP Spray Gun Kit
Equip professional automotive finishing operations with C.A. Technologies EP-JSLP-A-PPS, a Jaguar SLP gravity-feed HVLP E-Pack combining three fluid setups, two air caps, a 650 mL 3M PPS system, and the manufacturer's 12-point air-diffusion technology for controlled fine-finish atomization.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | EP-JSLP-A-PPS is the automotive PPS E-Pack configuration of the C.A. Technologies Jaguar SLP fine-finish gravity-feed HVLP gun. The package includes 1.3, 1.5 and 1.9 mm needle/nozzle setups, two air caps, a 650 mL 3M PPS cup, three lids and liners, PPS adapter, and gun service tools. |
| Function | The Jaguar SLP uses gravity-fed coating and regulated compressed air to produce HVLP atomization. C.A. Technologies' 12-point air-diffusion design is intended to create smaller, more uniform material particles and improve pattern coverage, blending and gloss. The gun reaches approximately 10 PSI at the nozzle from a 29 PSI inlet setting. |
| Industrial Applications | The “A” package is configured for automotive finishing. Manufacturer selection data places 1.3 and 1.5 mm Jaguar SLP setups in ranges suitable for materials such as automotive base coats, enamels, primers, epoxies, urethanes and automotive clear coats. The included 1.9 mm setup extends capability toward heavier coatings, including high-solids materials where appropriate. |
| Accurate Compatible Titan Machines | EP-JSLP-A-PPS is not manufactured by Titan Tool and has no verified model-specific Titan sprayer fitment. It is a complete C.A. Technologies gravity-feed compressed-air spray package. Operation requires a clean, regulated compressor capable of supplying the Jaguar SLP's air requirement rather than a Titan airless or turbine paint pump. |
| Accurate Part Number | C.A. Technologies EP-JSLP-A-PPS. “EP” identifies the E-Pack, “JSLP” identifies the Jaguar Stainless Low Pressure HVLP gun, “A” identifies the automotive configuration, and “PPS” identifies the package supplied with the 3M PPS gravity-cup system. |
| Compatible Parts & Assemblies | The automotive E-Pack includes 1.3, 1.5 and 1.9 mm needle/nozzle setups and two air caps. Jaguar SLP matched air caps include 23-1313 for 1.3 mm, 23-1315 for 1.5 mm and 23-1319 for 1.9 mm configurations. The broader platform supports 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.7, 1.9 and 2.2 mm matched setups. |
| Related Parts Commonly Serviced Together | Inspect the installed fluid nozzle, matching needle and air cap together whenever atomization, pattern consistency or fluid shutoff changes. PPS package components include the 650 mL cup and collar, replaceable lids and liners, and PPS adapter. Other service areas include the air-cap retaining assembly, fan control, packing, trigger and air valve. Jaguar SLP repair kit: 10-105. |
| Common Problems Solved | The package gives automotive finishers multiple fluid configurations without requiring separate complete guns for each material viscosity. The Jaguar SLP's low-pressure 12-point atomization system is designed to promote uniform coverage, controlled blending and fine finish quality, while the disposable-liner PPS system helps streamline material changes and reduce conventional cup-cleaning work. |
| Use with Coating Systems | Use with clean, dry and regulated compressed air capable of supplying approximately 13.5 CFM at 29 PSI. C.A. Technologies specifies 29 PSI gun inlet pressure to produce approximately 10 PSI at the nozzle. Jaguar SLP air-cap configurations provide up to an approximately 12-inch maximum pattern. Select the correct nozzle and cap for coating viscosity before final fan, fluid and air adjustment. |
| OEM & Brand Information | EP-JSLP-A-PPS is manufactured by C.A. Technologies, a Wagner Group brand, rather than Titan Tool. The Jaguar SLP is a stainless-fluid-passage HVLP gravity gun with 1/4-inch NPS male air inlet and 16 mm x 1.5 mm male fluid inlet. Manufacturer literature identifies the gun for professional automotive and wood fine-finishing applications. |
| Commercial Benefits | Professional refinishers receive three useful automotive fluid setups, two air caps and a 650 mL PPS system in one E-Pack. The 1.3, 1.5 and 1.9 mm configurations broaden material coverage, while the Jaguar SLP's 29 PSI inlet requirement, stainless-steel fluid passages and fine-finish atomization design support repeatable production work and efficient coating changes. |
Contractor Selection Insight
Choose EP-JSLP-A-PPS when automotive fine-finish quality and a broad coating range are priorities. The 1.3 and 1.5 mm setups cover many common basecoat, clear, enamel and urethane applications, while the 1.9 mm setup provides additional capacity for heavier materials. Your compressor should sustain approximately 13.5 CFM at 29 PSI; this is not a low-CFM gun. Choose the nozzle and matching air cap for the coating rather than compensating for an incorrect setup with excessive pressure.
FAQ Section
Key answers for professionals selecting the EP-JSLP-A-PPS Jaguar SLP E-Pack.
No reviews yet. Be the first to review this product!