C.A Tech CSLP-15-1315 CAT SLP HVLP Spray Gun
$467.48
$573.60
Save 19%
Available to Order
C.A. TECHNOLOGIES FINE-FINISH HVLP SPRAY GUN
C.A. Technologies CSLP-15-1315 CAT SLP HVLP Spray Gun is a professional pressure-feed finishing gun with a 1.5 mm setup, stainless-steel fluid passages and 12-point atomization technology. Operating at 13.5 CFM and 29 PSI, it supports controlled automotive and wood finishing.
Manufacturer: C.A. Technologies Part Number: CSLP-15-1315 Setup: 1.5 mm / 1315 Air Requirement: 13.5 CFM @ 29 PSI
The 1.5 mm configuration is particularly useful for compatible primers, wash primers, epoxies and other appropriate finishing materials. This is a pressure-feed spray gun requiring compressed air and a separate compatible pressurized fluid supply; a pressure pot, cup and compressor are not included.
Quantity
Genuine OEM Part
Fast Shipping
Easy Returns
Fluid Tip: 1.5 mm Air Cap: 23-1315 Air Consumption: 13.5 CFM Inlet Pressure: 29 PSI Weight: 20 oz.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CSLP-15-1315 is the C.A. Technologies CAT SLP Stainless Low Pressure HVLP pressure-feed spray gun configured with a 1.5 mm fluid orifice and matched 1315-series HVLP air cap. The gun uses stainless-steel fluid passages, weighs approximately 20 oz. and requires 13.5 CFM at 29 PSI inlet pressure. At the specified inlet pressure, the system produces approximately 10 PSI at the nozzle for HVLP operation. |
| Function | Uses compressed air and pressure-fed coating material to create a finely atomized spray pattern for professional finishing. C.A. Technologies' patented 12-point atomization design distributes air around the fluid stream to produce fine, uniform atomization. Fluid delivery is controlled primarily through correct fluid-orifice selection and supply pressure, with the gun's fluid-control knob providing fine adjustment of needle travel. |
| Industrial Applications | Designed primarily for professional automotive and wood finishing, with applications in cabinetry, furniture, millwork, refinishing shops, manufacturing and industrial coating operations. The CAT SLP platform is particularly suited to jobs requiring fine atomization, controlled blending, gloss and uniform coating distribution. C.A. Technologies also highlights the platform's ability to atomize NGR stains and other difficult-to-break-up materials. |
| Accurate Compatible Titan Machines | CSLP-15-1315 is not a Titan-manufactured replacement gun and does not have a defined Titan airless-sprayer fitment list. It is C.A. Technologies pressure-feed finishing equipment requiring compressed air and a compatible pressurized fluid source or appropriate fluid-feed system. It should not be represented as a direct replacement spray gun for Titan airless equipment solely because it appears in Wagner/Titan-related distribution channels. |
| Accurate Part Number | CSLP-15-1315 — C.A. Technologies CAT SLP HVLP Stainless Low Pressure Spray Gun with 1.5 mm fluid setup and 1315-series air-cap configuration. The 15 portion identifies the 1.5 mm setup, while 1315 corresponds to the matched air-cap family used with this configuration. Other CAT SLP sizes are separate configurations and should be selected according to coating requirements. |
| Compatible Parts & Assemblies | The 1.5 mm setup uses C.A. Technologies 23-1315 HVLP air cap, 33-0215 fluid tip and 40-1315 needle. The gun uses a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet. The CAT SLP family also supports matched 0.8, 1.0, 1.2, 1.3, 1.4, 1.7, 1.9 and 2.2 mm configurations when the correct air-cap, fluid-tip and needle combination is installed. |
| Related Parts Commonly Serviced Together | Inspect and service the 23-1315 air cap, 33-0215 fluid tip and 40-1315 needle as a matched spray setup. Other service areas include the fluid-nozzle body, nozzle carrier, air-cap adapter, fluid inlet, fluid-inlet seal, needle packing, air valve, trigger components, O-rings and seals. Keep air-cap openings and fluid passages clean to maintain balanced atomization and pattern quality. |
| Common Problems Solved | Designed to improve atomization and finish uniformity where conventional spray patterns can produce coarse droplets, uneven blending or inconsistent gloss. The 12-point air-distribution design creates fine atomization at relatively low inlet pressure, while stainless-steel fluid passages support professional coating use. Correctly matching the 1.5 mm setup to the coating helps achieve useful material flow without relying on excessive fluid restriction. |
| Use with Coating Systems | C.A. Technologies' CAT SLP selection guidance places the 1.5 mm size within the recommended range for compatible primers, wash primers and epoxies, with suitability for other materials depending on viscosity, reduction and application requirements. The wider CAT SLP nozzle family supports stains, sealers, single-stage coatings, base coats, clear coats and other finishing materials when the correctly sized setup is selected. |
| OEM & Brand Information | CAT SLP is manufactured by C.A. Technologies and should not be described as a Titan-manufactured or Titan OEM spray gun. The SLP name means Stainless Low Pressure, reflecting its stainless-steel fluid passages and low-pressure HVLP atomization design. C.A. Technologies specifies 29 PSI inlet pressure to produce approximately 10 PSI at the nozzle for this HVLP platform. |
| Commercial Benefits | The CSLP-15-1315 gives professional finishers a dedicated 1.5 mm pressure-feed HVLP configuration with fine 12-point atomization, stainless-steel fluid passages and relatively low 29 PSI inlet-pressure requirements. Its 20-ounce gun body and broad CAT SLP parts ecosystem make it practical for production shops that value repeatable finishes, serviceability and application-specific nozzle selection. |
Contractor Selection Insight
Choose CSLP-15-1315 when your coating and production process call for a 1.5 mm pressure-feed HVLP setup. C.A. Technologies specifically places 1.3–1.5 mm configurations in the range for primers, wash primers and epoxies. Make sure your compressor can continuously supply the required 13.5 CFM at 29 PSI, and remember that the gun requires a separate compatible fluid-supply system.
FAQ Section
Quick answers for finishers evaluating the CSLP-15-1315 CAT SLP HVLP spray gun.
No reviews yet. Be the first to review this product!