C.A. Tech CPR-G-W Spray Gun
C.A. TECHNOLOGIES CPR GRAVITY WOOD FINISHING CAT PACK
C.A. Technologies CPR-G-W Wood Finishing Spray Gun CAT Pack combines the CPR-G gravity gun with 1.0, 1.3, 1.5, and 1.7 mm fluid setups, two air caps, an aluminum gravity cup, regulator, and tools for versatile professional wood finishing.
CPR-G-W is manufactured by C.A. Technologies, not Titan Tool. The CAT Pack includes four needle/nozzle setups, CPR and HVLP air caps, a 700 mL aluminum gravity cup, mini regulator, gun hook, service tools, and a case for professional finishing applications.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CPR-G-W is C.A. Technologies' CPR Gravity CAT Pack configured specifically for wood-coating applications. It combines the CPR-G gun with four needle/nozzle setups, two atomizing air caps, a 700 mL aluminum gravity cup, mini air regulator, gun hook, service tools, and protective case packaging. |
| Function | Gravity feeds coating from the cup into the CPR-G while regulated compressed air atomizes the material. The 23-2101 pressure-reduced air cap uses approximately 11 CFM at 29 PSI and provides up to a 13-inch pattern; the 23-1301 HVLP air cap uses approximately 13.5 CFM at 29 PSI with up to a 12-inch pattern. |
| Industrial Applications | The W designation identifies the wood-coating package. Typical professional applications include cabinetry, furniture, doors, casework, architectural millwork, fixtures and production wood finishing. Its supplied fluid range can accommodate compatible stains, dyes, lacquers, enamels, primers, sealers, clear finishes, urethanes and selected higher-viscosity coatings. |
| Accurate Compatible Titan Machines | CPR-G-W is not a Titan OEM component and has no verified model-specific Titan airless-sprayer fitment. It is a C.A. Technologies compressed-air gravity-feed finishing package. Operation requires a clean, regulated air source capable of continuously supplying the selected air cap's airflow requirement rather than a Titan airless pump. |
| Accurate Part Number | C.A. Technologies CPR-G-W — CPR Gravity CAT Pack for wood coatings. Related configurations include CPR-G-A for automotive coatings, CPR-G-W-PPS with a 650 mL 3M PPS system, EP-CPR-G-W standard E-Pack, and EP-CPR-G-W-PPS PPS-equipped E-Pack. |
| Compatible Parts & Assemblies | The wood CAT Pack includes 1.0, 1.3, 1.5, and 1.7 mm needle/nozzle setups, two air caps, 700 mL aluminum gravity cup, mini regulator, gun hook, 3/8-inch socket, ratchet wrench, gun wrench, and cleaning brush. The CPR-G uses a 1/4-inch NPS male air inlet and 16 mm x 1.5 mm male fluid inlet. |
| Related Parts Commonly Serviced Together | Inspect the matched needle/nozzle set, atomizing air cap, cup and fluid connection, cup vent, gun seals, fluid controls, fan control, trigger and air-valve components during routine service. C.A. Technologies specifies repair kit 10-105 for servicing the CPR-G gravity-feed gun. |
| Common Problems Solved | Four supplied fluid setups allow wood finishers to move from low-viscosity stains toward progressively heavier compatible finishes without purchasing several dedicated guns. The adjustable fan and fluid controls support pattern tuning, while dual air-cap configurations let operators choose between pressure-reduced CPR atomization and HVLP operation. |
| Use with Coating Systems | C.A. Technologies' selection chart places 1.0 mm among setups for very thin materials such as stains and dyes; 1.3 mm within the range for lacquers, enamels, primers and sealers; and 1.3–1.7 mm within the range for medium materials including epoxies, urethanes and clear coats. Always follow the coating manufacturer's application data. |
| OEM & Brand Information | CPR-G-W is manufactured by C.A. Technologies, a Wagner Group brand, rather than Titan Tool. The CPR-G weighs approximately 20 ounces and uses stainless-steel material-contact components. C.A. Technologies describes CPR technology as combining HVLP-type transfer efficiency with faster pressure-reduced atomization characteristics. |
| Commercial Benefits | Professional wood finishers receive four fluid configurations, two air-cap technologies, cup, regulator and service accessories in one CAT Pack. The broad configuration range makes CPR-G-W useful for shops applying multiple compatible wood finishes while reducing the need to purchase and maintain separate guns for each material range. |
Contractor Selection Insight
Choose CPR-G-W when you want the complete wood-finishing CAT Pack with a reusable aluminum gravity cup, regulator, gun hook and four fluid setups. The 1.0, 1.3, 1.5 and 1.7 mm configurations provide useful flexibility from thin stains through compatible higher-build finishes. If faster disposable-liner material changes are more important, compare the CPR-G-W-PPS configuration instead.
FAQ Section
Key answers for professionals selecting the CPR-G-W wood-finishing CAT Pack.
No reviews yet. Be the first to review this product!