C.A Tech CPR-G-W-PPS Spray Gun
C.A. TECHNOLOGIES CPR GRAVITY WOOD FINISHING PPS CAT PACK
C.A. Technologies CPR-G-W-PPS Wood Finishing Spray Gun CAT Pack combines four 1.0–1.7 mm fluid setups, CPR and HVLP air caps, and a 650 mL 3M PPS cup system for flexible professional cabinetry, furniture, millwork, and production wood finishing.
CPR-G-W-PPS is manufactured by C.A. Technologies, not Titan Tool. This wood-finishing CAT Pack includes the CPR-G gun, 1.0, 1.3, 1.5 and 1.7 mm setups, two air caps, 650 mL PPS cup, three lids/liners, tools and case packaging.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CPR-G-W-PPS is the C.A. Technologies CPR Gravity CAT Pack configured for wood finishing with a 3M PPS material system. The package includes the CPR-G gun, four needle/nozzle setups, two air caps, a 650 mL PPS cup, three lids/liners, tools and case packaging. |
| Function | The gravity-feed CPR-G atomizes coating using regulated compressed air. Its CPR pressure-reduced technology is designed to combine HVLP-type transfer efficiency with the application speed and finish quality associated with conventional air spray. The package also includes an HVLP air cap, allowing the gun's atomization configuration to be changed for the coating and job. |
| Industrial Applications | The W configuration is intended for wood finishing and production coating work. Suitable applications include cabinetry, furniture, doors, casework, architectural millwork, fixtures and other professional finishing operations using compatible stains, lacquers, sealers, primers, enamels, clear finishes, urethanes and other properly matched coatings. |
| Accurate Compatible Titan Machines | CPR-G-W-PPS is not a Titan OEM component and no model-specific Titan sprayer fitment is specified. It is a C.A. Technologies compressed-air gravity-feed spray system. Operation requires a clean, regulated compressed-air source capable of supplying the airflow required by the selected CPR or HVLP air cap. |
| Accurate Part Number | C.A. Technologies CPR-G-W-PPS — CPR Gravity Compliant CAT Pack with PPS for wood finishing. Related configurations include CPR-G-W with an aluminum gravity cup, CPR-G-A-PPS for automotive applications, and EP-CPR-G-W-PPS as the related woodworking E-Pack configuration. |
| Compatible Parts & Assemblies | The verified CAT Pack includes 1.0, 1.3, 1.5 and 1.7 mm needle/nozzle setups, two air caps, a 650 mL PPS cup and three lids/liners, plus service tools. The CPR-G uses a 1/4-inch NPS male air inlet and 16 mm x 1.5 mm fluid connection and weighs approximately 20 ounces. |
| Related Parts Commonly Serviced Together | Service inspection should include the installed needle/nozzle set, CPR or HVLP air cap, PPS cup connection and adapter, lids and liners, fluid seals, trigger, air valve and fluid-control components. C.A. Technologies specifies 10-105 as the repair kit for the CPR-G spray-gun platform. |
| Common Problems Solved | Four included fluid setups reduce the need to maintain separate spray guns when changing between thin and heavier compatible wood coatings. The PPS liner system can simplify coating changes and cleanup compared with a conventional reusable gravity cup, while interchangeable CPR and HVLP air caps provide additional atomization flexibility. |
| Use with Coating Systems | The four supplied 1.0, 1.3, 1.5 and 1.7 mm setups provide a useful range for professional wood-finishing materials. Smaller setups can be selected for appropriately thin coatings, while progressively larger setups support compatible medium and higher-viscosity finishes. Final setup should always follow the coating manufacturer's viscosity, reduction and atomization recommendations. |
| OEM & Brand Information | CPR-G-W-PPS is manufactured by C.A. Technologies and should not be described as Titan-manufactured OEM equipment. The CPR-G uses stainless-steel fluid passages. Its CPR air-cap configuration requires approximately 11 CFM at 29 PSI, while the HVLP configuration is rated approximately 13.5 CFM at 29 PSI. |
| Commercial Benefits | Professional finishers receive four fluid configurations, two atomization choices and PPS material handling in one wood-focused CAT Pack. The combination supports rapid configuration changes across compatible coatings while the PPS system helps streamline material handling and cleanup in cabinet, furniture, millwork and production-finishing environments. |
Contractor Selection Insight
Choose CPR-G-W-PPS when you want the more complete CAT Pack format for professional wood finishing while using PPS material handling instead of a conventional aluminum cup. Its four 1.0, 1.3, 1.5 and 1.7 mm setups provide broad coating flexibility, while the CPR and HVLP air caps let you configure atomization for different finishing requirements. Size the compressor for continuous airflow, not tank capacity alone.
FAQ Section
Key answers for professionals selecting the CPR-G-W-PPS wood-finishing CAT Pack.
No reviews yet. Be the first to review this product!