C.A Tech CPR-303R2 HVLP Spray Gun
C.A. Technologies Professional Fine-Finish Spray System
CPR-303R2 Pressure Reduced Spray Gun Pack combines C.A. Technologies CPR fine-finish atomization with a regulated 1-quart pressure cup. The complete kit includes three needle/nozzle setups, CPR and HVLP air caps, 51-303R2 cup with regulator, tools and a protective case.
Important identification: CPR-303R2 appears in Titan-distributed literature, but the spray equipment itself is manufactured by C.A. Technologies. The CPR system combines HVLP-style transfer efficiency with the application speed and finish quality associated with conventional air spray.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Complete CPR pressure-reduced fine-finish spray-gun package with regulated 1-quart pressure cup, multiple fluid setups, two air-cap technologies, tools and carrying case. |
| Function | Atomizes finishing materials using compressed air and pressure-assisted fluid delivery. The CPR design is intended to combine high transfer efficiency with faster application and fine finish quality. |
| Industrial Applications | Professional fine-finishing operations where controlled atomization and finish quality are required, including suitable wood, furniture, cabinet, automotive and general finishing applications when paired with the correct needle/nozzle setup and coating. |
| Accurate Compatible Titan Machines | Not a replacement component for a specific Titan airless sprayer. CPR-303R2 is a complete C.A. Technologies compressed-air spray package that was distributed through Titan finishing-equipment literature. |
| Accurate Part Number | CPR-303R2 — CPR pressure-reduced spray gun pack with 51-303R2 cup and regulator. |
| Spray Technology | C.A. Technologies Pressure Reduced fine-finish technology. Manufacturer literature describes the CPR design as combining HVLP transfer efficiency with conventional-style speed and finish quality. |
| Air Requirement | The CPR nozzle requires approximately 11 CFM at a recommended 29 PSI gun inlet pressure. |
| Air Inlet | 1/4-inch NPS male. |
| Fluid Inlet | 3/8-inch NPS male on the CPR pressure-feed gun. |
| Spray Gun Weight | Approximately 20 oz for the CPR pressure-feed spray gun. |
| Needle / Nozzle Setups | Three different needle and nozzle setups are supplied in the CPR pack, allowing the operator to configure the gun for a broader range of finishing materials. |
| Air Caps | Two air caps are included: the CPR pressure-reduced air cap and an HVLP air cap for multi-application flexibility. |
| Pressure Cup | Includes C.A. Technologies 51-303R2 1-quart pressure cup with regulator for controlled pressure-assisted fluid delivery. |
| Cup Pressure | The 51-303R2 regulated pressure cup is rated for a maximum cup pressure of 10 PSI. |
| Cup Fluid Protection | The 51-303R2 incorporates a one-way check valve designed to prevent fluid from traveling backward into the gun or regulator. |
| Gun Repair Kit | C.A. Technologies repair kit 10-106 is specified for the CPR pressure-feed spray gun. |
| Compatible Parts & Assemblies | Designed around the CPR pressure-feed gun, interchangeable CPR/HVLP air caps, supplied needle/nozzle combinations and 51-303R2 regulated pressure-cup assembly. |
| Related Parts Commonly Serviced Together | CPR needle/nozzle components, air caps, gun seals and packing components, 10-106 repair kit, 51-303R2 cup, 51-324 check-valve assembly and 51-334 cup gasket. |
| Package Contents | CPR spray gun, three needle/nozzle setups, two air caps, 51-303R2 pressure cup with regulator, tools and durable carrying case. |
| Common Problems Solved | Provides one configurable fine-finish package for operators who need pressure-assisted fluid delivery, multiple material setups, controlled cup pressure and a choice between CPR and HVLP atomization characteristics. |
| Use with Coating Systems | The three supplied needle/nozzle setups allow the package to accommodate a range of finishing materials. Always select the fluid setup, air cap, pressure and material reduction according to the coating manufacturer's requirements. |
| OEM & Brand Information | Manufactured by C.A. Technologies. CPR-303R2 is documented in Titan-distributed C.A. Technologies finishing-equipment literature; it should not be represented as a Titan-manufactured OEM spray gun. |
| Commercial Benefits | A complete professional package reduces the need to purchase the gun, alternate fluid setups, air caps, regulated pressure cup, tools and storage case separately, while supporting multiple finishing applications from one kit. |
Contractor Selection Insight
Choose CPR-303R2 when you need a complete pressure-feed fine-finish package rather than a bare spray gun. Its regulated 1-quart cup is particularly useful for smaller professional finishing jobs requiring controlled fluid delivery, while the three needle/nozzle setups and CPR/HVLP air caps provide flexibility for different materials and finish requirements.
FAQ Section
Quick answers for confirming manufacturer, spray technology, air requirements and package contents.
No reviews yet. Be the first to review this product!