C.A. TECH CP-JSLP-W Spray Gun
C.A. TECHNOLOGIES JAGUAR SLP WOOD FINISHING CAT PACK
C.A. Technologies CP-JSLP-W Jaguar SLP HVLP Spray Gun Kit is a professional wood-finishing CAT Pack with 1.0, 1.3, 1.5, and 1.9 mm needle/nozzle setups, two air caps, aluminum gravity cup, gun hook, tools, and fine-finish HVLP atomization.
CP-JSLP-W is manufactured by C.A. Technologies, not Titan Tool. Its Jaguar SLP uses stainless-steel fluid passages and 12-point atomization for professional wood finishing. The CAT Pack adds a reusable aluminum gravity cup, gun hook, tools, and multiple fluid setups for broader coating flexibility.
C.A. TECHNOLOGIES JAGUAR SLP WOOD FINISHING CAT PACK
C.A. Technologies CP-JSLP-W Jaguar SLP HVLP Spray Gun Kit
Equip professional wood-finishing operations with C.A. Technologies CP-JSLP-W, a Jaguar SLP gravity-feed HVLP CAT Pack combining four fluid setups, two air caps, an aluminum gravity cup, gun hook, and tools with the manufacturer's fine-finish 12-point atomization technology.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-JSLP-W is the wood-finishing CAT Pack built around the C.A. Technologies Jaguar SLP fine-finish gravity-feed HVLP spray gun. The manufacturer specifies four needle/nozzle setups—1.0, 1.3, 1.5 and 1.9 mm—two air caps, an aluminum gravity cup, gun hook and tools for a broad range of professional finishing requirements. |
| Function | Coating gravity-feeds from the aluminum cup while regulated compressed air atomizes material through the selected Jaguar SLP air cap. The gun's 12-point atomization design distributes air around the fluid stream for fine particle breakup. C.A. Technologies specifies 29 PSI gun inlet pressure to achieve approximately 10 PSI at the nozzle for HVLP operation. |
| Industrial Applications | The “W” designation identifies the wood-finishing package. The Jaguar SLP platform is suited to professional furniture, cabinetry, millwork, doors, architectural woodwork and production finishing. Manufacturer application guidance covers materials ranging from thin stains and dyes through sealers, primers, epoxies, clear coats and high-solids finishes when the correct fluid setup is selected. |
| Accurate Compatible Titan Machines | CP-JSLP-W is not manufactured by Titan Tool and has no verified model-specific Titan machine fitment. It is a complete C.A. Technologies compressed-air gravity-feed spray package requiring a clean, regulated compressor capable of supplying the required airflow. It should not be represented as a replacement gun for a Titan airless sprayer or Titan turbine HVLP machine. |
| Accurate Part Number | C.A. Technologies CP-JSLP-W. “CP” identifies the CAT Pack configuration, “JSLP” identifies the Jaguar SLP fine-finish HVLP platform, and “W” identifies the wood-finishing setup. This aluminum-cup CAT Pack is distinct from CP-JSLP-W-PPS, which uses a 3M PPS gravity-cup system. |
| Compatible Parts & Assemblies | The wood CAT Pack uses 1.0, 1.3, 1.5 and 1.9 mm configurations. Matching components include 33-0210 nozzle with 40-1310 needle and 23-1310 air cap; 33-0213 with 40-1313 and 23-1313; 33-0215 with 40-1315 and 23-1315; and 33-0219 with 40-1319 and 23-1319. The broader JSLP platform also supports 0.8, 1.2, 1.4, 1.7 and 2.2 mm setups. |
| Related Parts Commonly Serviced Together | Inspect the installed fluid nozzle, corresponding needle and matching air cap as a system whenever pattern quality, atomization or fluid shutoff changes. Related service areas include the air-cap retaining assembly, fan control, fluid control, needle seal, trigger, air valve and gravity-cup sealing components. C.A. Technologies specifies repair kit 10-105 for the Jaguar SLP. |
| Common Problems Solved | The four included fluid configurations allow finishers to match gun setup to coating viscosity rather than relying on excessive air pressure or fluid restriction. C.A. Technologies promotes the Jaguar SLP's fine atomization for blending, gloss and consistent finishing, making the platform particularly useful where uniform stain, toner and clear-finish application is commercially important. |
| Use with Coating Systems | Use with clean, dry and regulated compressed air capable of sustaining approximately 13.5 CFM at 29 PSI. The 1.0 mm configuration is suited to very thin materials such as stains and dyes, while the larger included configurations extend the working range toward medium- and higher-viscosity finishing materials. Always match the nozzle, needle and air cap to the coating before final air, fan and fluid adjustment. |
| OEM & Brand Information | CP-JSLP-W is manufactured by C.A. Technologies, not Titan Tool. The Jaguar SLP is a gravity-feed HVLP spray gun with stainless-steel fluid passages, 1/4-inch NPS male air inlet and 16 mm x 1.5 mm male fluid inlet. Manufacturer literature specifies 13.5 CFM at 29 PSI and identifies repair kit 10-105 for the JSLP platform. |
| Commercial Benefits | The CP-JSLP-W packages four useful wood-finishing fluid configurations with two air caps, a reusable aluminum gravity cup, gun hook and tools. This gives professional shops a configurable fine-finish system in one package, while the stainless-steel fluid path and serviceable JSLP platform support repeat production work and future setup changes. |
Contractor Selection Insight
Choose CP-JSLP-W when your wood-finishing operation needs one professional HVLP gun package capable of moving between thin stains and more substantial finishing materials. The included 1.0, 1.3, 1.5 and 1.9 mm setups provide useful application flexibility, while the aluminum cup is reusable and straightforward to service. Confirm that your compressor can continuously supply approximately 13.5 CFM at 29 PSI before selecting this gun.
FAQ Section
Key answers for professionals selecting the CP-JSLP-W Jaguar SLP CAT Pack.
No reviews yet. Be the first to review this product!