Titan CP-J300C-W Spray Gun
C.A. TECHNOLOGIES JAGUAR 300C WOOD FINISHING CAT PACK
C.A. Technologies CP-J300C-W Jaguar 300C Conventional Spray Gun Kit is a professional wood-finishing CAT Pack with 1.0, 1.3, and 1.6 mm needle/nozzle setups, two air caps, aluminum gravity cup, regulator, tools, and conventional fine-finish atomization.
CP-J300C-W is manufactured by C.A. Technologies, not Titan Tool. This wood-finishing CAT Pack is built around the Jaguar 300C conventional gravity-feed gun and includes three fluid setups, two air caps, an aluminum gravity cup, regulator, and tools for adaptable professional finishing.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-J300C-W is the wood-finishing CAT Pack built around the C.A. Technologies Jaguar J300C gravity-feed conventional spray gun. The verified package includes three needle/nozzle setups—1.0, 1.3 and 1.6 mm—two air caps, an aluminum gravity cup, regulator and gun tools for professional fine-finish applications. |
| Function | The J300C uses conventional compressed-air atomization with coating gravity-fed from its top-mounted aluminum cup. C.A. Technologies describes the gun as having strong break-up power for fine atomization. Fluid output can be matched through proper nozzle selection and fine-tuned with the fluid control, while the fan control adjusts spray-pattern width. |
| Industrial Applications | The “W” package is configured for wood-finishing work. Its multiple fluid setups support a range of compatible fine-finish materials used on cabinetry, furniture, doors, millwork, architectural woodwork and production components. The broader Jaguar 300C platform is also identified by C.A. Technologies for automotive fine-finishing applications. |
| Accurate Compatible Titan Machines | CP-J300C-W is not manufactured by Titan Tool and no model-specific Titan sprayer compatibility is established. This is a complete C.A. Technologies gravity-feed air spray system requiring a suitable compressed-air source. It does not require a Titan airless pump or a separate pressure-feed coating pump for normal operation. |
| Accurate Part Number | C.A. Technologies CP-J300C-W. “CP” identifies the CAT Pack, “J300C” identifies the Jaguar 300C conventional fine-finish gun, and “W” identifies the wood-finishing package. The CP-J300C-W should not be confused with CP-J300C-A for automotive applications or CP-J300C-W-PPS with the PPS cup system. |
| Compatible Parts & Assemblies | The CAT Pack includes 1.0, 1.3 and 1.6 mm needle/nozzle setups plus two air caps. The broader J300C platform supports 0.8, 1.0, 1.3, 1.4 and 1.6 mm fluid nozzle sizes. Documented conventional air caps include 23-2010, 23-2013, 23-2014 and 23-2016, with the correct cap, nozzle and needle selected as a matched atomization system. |
| Related Parts Commonly Serviced Together | Inspect the installed fluid nozzle, matching needle and air cap together whenever pattern quality, atomization or fluid shutoff changes. Other service areas include the fan control, air-cap ring, needle packing, trigger, air valve and fluid-control components. C.A. Technologies identifies repair kit 10-105 for the Jaguar 300C. |
| Common Problems Solved | The CP-J300C-W gives wood finishers multiple fluid configurations in one package, reducing dependence on a single fixed nozzle size. The J300C's conventional atomization is designed for strong coating break-up and fine finishes, while the interchangeable setups let operators better match fluid delivery to changing coating viscosity and production requirements. |
| Use with Coating Systems | Use with clean, dry and regulated compressed air. Current manufacturer product information specifies approximately 10.3 CFM at 45 PSI for the J300C. Manufacturer technical literature lists its 20-series conventional air caps at approximately 9–10.7 CFM depending on operating pressure and configuration. Select the proper fluid setup before fine-tuning air and fluid controls. |
| OEM & Brand Information | CP-J300C-W is manufactured by C.A. Technologies, not Titan Tool. The Jaguar J300C is a conventional gravity-feed air spray gun, not an HVLP or airless gun. Current manufacturer product information lists a 1/4-inch NPS male air inlet, 16 mm x 1.5 mm male fluid inlet and approximately 20-ounce gun weight. |
| Commercial Benefits | This CAT Pack combines the Jaguar 300C with three wood-finishing fluid setups, two air caps, an aluminum gravity cup, regulator and tools. The package lets professional finishers change atomization configurations as material requirements change while retaining one serviceable gun platform designed specifically for high-quality conventional fine finishing. |
Contractor Selection Insight
Choose CP-J300C-W when you want the Jaguar 300C's conventional fine-finish atomization together with an aluminum gravity cup and multiple wood-finishing setups in one package. The included 1.0, 1.3 and 1.6 mm configurations provide useful flexibility across changing material viscosities. If disposable PPS liners are important to your workflow, select CP-J300C-W-PPS instead; if you need HVLP technology rather than conventional atomization, choose an appropriate Jaguar HVLP platform.
FAQ Section
Key answers for professionals selecting the CP-J300C-W Jaguar 300C CAT Pack.
No reviews yet. Be the first to review this product!
