Titan CP-FELCFM Spray Gun
C.A. TECHNOLOGIES FE-LINE LOW CFM HVLP SMART PACK
C.A. Technologies CP-FELCFM FE-Line Low CFM HVLP Spray Gun Smart Pack combines a lightweight 15-ounce pressure-feed gun with 0.8, 1.3, and 1.7 mm setups, two air caps, tools, and carrying case for professional finishing with reduced compressor demand.
CP-FELCFM is manufactured by C.A. Technologies, not Titan Tool. This Smart Pack includes 0.8, 1.3 and 1.7 mm fluid setups plus 21-1090 and 21-1094 air caps. It does not include a pressure cup; connect it to a suitable regulated pressure-feed material source.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-FELCFM is the Smart Pack configuration of the C.A. Technologies FE-Line Low CFM pressure-feed HVLP spray gun. The package includes the FE-LCFM gun, 0.8, 1.3 and 1.7 mm fluid setups, 21-1090 and 21-1094 air caps, multipurpose wrench, ratchet wrench with 3/8-inch socket, cleaning brush and carrying case. No pressure cup is included. |
| Function | The pressure-feed FE-LCFM receives coating from a separately pressurized fluid source and atomizes it with regulated compressed air. The 21-1090 low-CFM air cap requires approximately 6 CFM at 15 PSI. The included 21-1094 air cap requires approximately 13 CFM at 33 PSI, providing a higher-airflow configuration when the application requires it. |
| Industrial Applications | Designed for professional onsite and production finishing where compressor capacity, mobility and gun weight matter. Typical applications include cabinetry, furniture, millwork, woodworking, maintenance, metal finishing and general industrial coating with compatible stains, dyes, lacquers, enamels, sealers, primers, clear finishes and other properly matched coatings. |
| Accurate Compatible Titan Machines | CP-FELCFM is not a Titan OEM component and no model-specific Titan sprayer fitment is specified. It is a C.A. Technologies compressed-air pressure-feed spray-gun package. The gun must be connected to a suitable regulated fluid supply and compressor rather than directly to a Titan airless spraying machine. |
| Accurate Part Number | C.A. Technologies CP-FELCFM — FE-Line LCFM Smart Pack. Related configurations include CP-FELCFM-303R2 / CP-FELCFM-303-R2 with a regulated 1-quart aluminum pressure cup and CP-FELCFM-PPSR2 / CP-FELCFM-PPS-R2 with a regulated 1-quart PPS pressure cup. |
| Compatible Parts & Assemblies | The Smart Pack includes 0.8, 1.3 and 1.7 mm setups. The broader FE-LCFM platform supports 0.5, 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6 and 1.7 mm fluid nozzles. Available air caps are 21-1090, 21-1091, 21-1092, 21-1093 and 21-1094, with airflow requirements ranging from approximately 6 to 13 CFM depending on configuration. |
| Related Parts Commonly Serviced Together | Common service points include the selected 31-02xx fluid nozzle, 40-1801 needle, 21-1090 through 21-1094 air caps, 21-1001 air-cap ring, 60-1317 fan control, fluid-control and air-valve components, trigger, seals and fluid connections. C.A. Technologies specifies repair kit 10-140 for the FE-Line LCFM gun. |
| Common Problems Solved | The FE-LCFM addresses the high compressor demand associated with many professional HVLP guns. Its 21-1090 configuration requires only approximately 6 CFM, while the lightweight 15-ounce gun helps reduce operator fatigue and improve mobility. Multiple supplied fluid setups also reduce the need to purchase separate guns for different coating viscosities. |
| Use with Coating Systems | The manufacturer's application chart supports configurations for very thin inks, dyes, solvents and stains through thin and medium finishing materials and heavier compatible coatings. The standard FE-LCFM setup is 1.3 mm with the 21-1090 air cap. Select nozzle size, air cap, material pressure and atomizing pressure according to coating viscosity and application requirements. |
| OEM & Brand Information | CP-FELCFM is manufactured by C.A. Technologies and is not Titan-manufactured OEM equipment. The FE-Line LCFM weighs approximately 15 ounces and uses a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet. The standard 1.3 mm x 21-1090 setup requires approximately 6 CFM. |
| Commercial Benefits | This Smart Pack gives professional finishers a low-air-demand HVLP platform with three fluid setups and two atomization ranges while allowing the material-delivery system to be selected separately. Its compact 15-ounce design and 6-CFM low-air option make it especially practical for mobile finishing, smaller compressor installations and shops seeking greater equipment flexibility. |
Contractor Selection Insight
Choose CP-FELCFM when you already own a compatible pressure cup or remote pressure tank, or when you want to select the fluid-delivery system separately. The included 21-1090 air cap requires only about 6 CFM at 15 PSI, and C.A. Technologies states that the standard 1.3 x 1090 configuration can operate with a suitable 2 HP compressor. Choose CP-FELCFM-303R2 or CP-FELCFM-PPSR2 when a pressure cup is needed in the package.
FAQ Section
Key answers for professionals selecting the CP-FELCFM Smart Pack.
No reviews yet. Be the first to review this product!