Titan CP-FELCFM-303R2 Spray Gun
C.A. TECHNOLOGIES FE-LINE LOW CFM HVLP CAT PACK
C.A. Technologies CP-FELCFM-303R2 FE-Line Low CFM HVLP Spray Gun CAT Pack combines a lightweight pressure-feed gun, three fluid setups, two air caps, and regulated 1-quart aluminum pressure cup for versatile professional finishing with low-air-demand capability.
This is C.A. Technologies equipment, not Titan OEM. The FE-LCFM weighs approximately 15 oz and includes low- and higher-air-consumption configurations. Its 21-1090 low-CFM air cap requires only 6 CFM at 15 PSI, making it suitable for appropriately sized low-output compressors.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-FELCFM-303R2 is the C.A. Technologies FE-Line Low CFM CAT Pack with a regulated 1-quart aluminum pressure cup. The package includes the FE-LCFM gun, three needle/nozzle setups in 0.8, 1.3 and 1.7 mm sizes, two air caps, pressure cup with regulator, service tools and package case. |
| Function | The regulated pressure cup supplies coating to the FE-LCFM while compressed air atomizes the material. The 21-1090 low-CFM air cap requires approximately 6 CFM at 15 PSI. A higher-output 21-1094 air-cap configuration requires approximately 13 CFM at 33 PSI, giving the package flexibility between reduced air consumption and higher-airflow atomization. |
| Industrial Applications | Designed for professional pressure-feed finishing where portability, low gun weight and flexible compressor requirements are important. Applications include woodworking, cabinetry, furniture, millwork, maintenance, metal finishing and general industrial coating with compatible stains, lacquers, enamels, sealers, primers, clears and other properly matched finishing materials. |
| Accurate Compatible Titan Machines | CP-FELCFM-303R2 is not a Titan OEM component and has no verified model-specific Titan sprayer fitment. It is a complete C.A. Technologies compressed-air pressure-feed CAT Pack. The low-CFM 21-1090 configuration is specifically designed to operate with an appropriately sized low-air-consumption compressor rather than a Titan airless spraying machine. |
| Accurate Part Number | C.A. Technologies CP-FELCFM-303R2. Current manufacturer listings use this part number for the FE-Line LCFM CAT Pack with 303-R2 pressure cup. Manufacturer catalog literature may also display the format CP-FELCFM-303-R2. Related packages include CP-FELCFM Smart Pack and CP-FELCFM-PPSR2 with a PPS pressure cup. |
| Compatible Parts & Assemblies | The CAT Pack supplies 0.8, 1.3 and 1.7 mm needle/nozzle setups, two air caps and the regulated 1-quart aluminum pressure cup. The FE-LCFM uses a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet. The broader FE-LCFM platform supports nozzle configurations from approximately 0.5 through 1.7 mm. |
| Related Parts Commonly Serviced Together | Routine service should include the selected needle/nozzle assembly, 21-1090 or other compatible air cap, gun seals and controls, fluid and air connections, pressure-cup gasket, regulator, check valve and pressure-relief components. C.A. Technologies specifies repair kit 10-140 for the FE-Line LCFM spray gun. |
| Common Problems Solved | The FE-LCFM addresses applications where conventional professional HVLP guns can demand more compressor capacity than is conveniently available. Its 21-1090 configuration reduces air consumption to approximately 6 CFM, while the supplied alternative air cap gives operators a higher-CFM option when compressor capacity and coating requirements favor greater airflow. |
| Use with Coating Systems | The supplied 0.8, 1.3 and 1.7 mm setups provide useful coverage across low-, medium- and higher-viscosity compatible finishing materials. C.A. Technologies identifies 1.3 x 1090 as the standard low-CFM configuration. Always select the fluid setup, material pressure and atomizing air according to coating viscosity and the coating manufacturer's application recommendations. |
| OEM & Brand Information | CP-FELCFM-303R2 is manufactured by C.A. Technologies and is not Titan-manufactured OEM equipment. The FE-Line LCFM is a lightweight HVLP pressure-feed gun weighing approximately 15 ounces. Manufacturer specifications list a 1/4-inch NPS male air inlet, 3/8-inch NPS male fluid inlet and repair kit 10-140. |
| Commercial Benefits | This CAT Pack combines gun, multiple fluid setups, low- and higher-CFM atomization choices, regulated material supply and service accessories in one package. Its low-CFM configuration is particularly valuable for mobile contractors and smaller finishing shops seeking professional pressure-feed spraying without requiring the air consumption of many conventional HVLP guns. |
Contractor Selection Insight
Choose CP-FELCFM-303R2 when compressor capacity is a major selection factor but you still want a complete professional pressure-feed package. The 21-1090 low-CFM configuration needs only about 6 CFM at 15 PSI, while the included higher-CFM option provides additional atomization flexibility. The regulated 1-quart pressure cup makes this package more immediately usable than the gun-only CP-FELCFM Smart Pack.
FAQ Section
Key answers for professionals selecting the CP-FELCFM-303R2 CAT Pack.
No reviews yet. Be the first to review this product!