C.A Tech CP-FELCFM-202 FE-line Low CFM HVLP Spray Gun
C.A. TECHNOLOGIES FE-LINE LOW-CFM HVLP SPRAY SYSTEM
C.A. Technologies CP-FELCFM-202 FE-Line Low CFM HVLP Spray Gun Package combines the lightweight FE-LCFM pressure-feed gun with multiple nozzle setups, low-air-consumption atomization, and a 2.5-gallon pressure pot configuration for professional finishing with smaller compressor systems.
This equipment is manufactured by C.A. Technologies rather than Titan Tool. The FE-Line LCFM platform weighs approximately 15 oz and uses a 1/4-inch NPS(M) air inlet, 3/8-inch NPS(M) fluid inlet, and interchangeable air caps, including the 6-CFM 21-1090 low-consumption configuration.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-FELCFM-202 is a C.A. Technologies pressure-feed package built around the FE-Line Low CFM HVLP spray-gun platform and a 2.5-gallon material-pressure-pot configuration. The FE-LCFM gun is a lightweight, ergonomic low-air-consumption development of the L100H platform for professional finishing. |
| Function | A separate pressure pot supplies coating to the gun while regulated compressed air atomizes the material through the selected HVLP air cap. The FE-LCFM platform is specifically designed to reduce compressor demand. Its standard 1.3 mm x 1090 configuration uses only 6 CFM, allowing operation with appropriately sized lower-output compressor systems. |
| Industrial Applications | Suitable for professional pressure-feed finishing where HVLP atomization and reduced compressed-air demand are priorities. Applications can include cabinetry, furniture, millwork, doors, architectural woodwork and other shop or field finishing using coatings compatible with the selected fluid nozzle, air cap, pressure pot and gun fluid passages. |
| Accurate Compatible Titan Machines | CP-FELCFM-202 is not a Titan OEM replacement spray gun or an accessory specified for a particular Titan airless sprayer. It is a C.A. Technologies compressed-air HVLP pressure-feed system. Compatibility is determined by the required compressed-air supply, pressure-feed material system and selected gun setup rather than by a Titan airless machine model. |
| Accurate Part Number | C.A. Technologies CP-FELCFM-202 identifies an FE-Line Low CFM pressure-feed configuration associated with the FE-LCFM gun and 2.5-gallon pressure-pot system. C.A. Technologies also documents CP-FELCFM as the Smart Pack, CP-FELCFM-303-R2 as the 1-quart aluminum pressure-cup CAT Pack, and CP-FELCFM-PPS-R2 as the PPS pressure-cup package. |
| Compatible Parts & Assemblies | The FE-LCFM platform supports fluid-nozzle sizes from 0.5 through 1.7 mm. Available air caps include 21-1090, 21-1091, 21-1092, 21-1093, and 21-1094. Their documented air requirements are 6, 8, 8, 10, and 13 CFM respectively, allowing the atomization system to be configured around the coating and available compressor capacity. |
| Related Parts Commonly Serviced Together | Routine service should include the matched fluid needle and nozzle, selected air cap, packing and seals, air-control components, fluid passages, pressure-pot regulators, fluid hose and air hose. C.A. Technologies identifies 10-140 as the repair kit for the FE-Line LCFM gun. |
| Common Problems Solved | The FE-LCFM platform addresses situations where conventional production spray guns demand more compressed air than a smaller compressor can reliably supply. Its low-CFM air-cap choices reduce air demand, while the lightweight approximately 15-ounce gun helps reduce operator fatigue and the pressure-feed material supply supports longer spraying periods. |
| Use with Coating Systems | Select the fluid nozzle and air cap according to material viscosity, desired finish, transfer requirements and available compressor output. Available nozzle sizes span 0.5, 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, and 1.7 mm, providing broad configuration flexibility for compatible professional finishing materials. |
| OEM & Brand Information | The FE-Line LCFM and CP-FELCFM packages are manufactured by C.A. Technologies. The gun weighs approximately 15 ounces and uses a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet. This is C.A. Technologies equipment and should not be represented as a Titan-manufactured OEM spray gun. |
| Commercial Benefits | CP-FELCFM-202 combines low-CFM HVLP atomization with pressure-fed material delivery for professional production work. The 2.5-gallon material capacity reduces frequent refilling, while multiple nozzle and air-cap options let contractors balance coating requirements, finish quality and compressor capacity from one adaptable FE-Line platform. |
Contractor Selection Insight
Choose CP-FELCFM-202 when your priority is pressure-feed production with reduced compressor demand and more material capacity than a cup-mounted system. The FE-LCFM's 21-1090 air cap requires only 6 CFM in its standard 1.3 mm setup, while the 2.5-gallon pressure-pot configuration supports longer finishing runs. Match the actual nozzle and air cap to your coating before spraying.
FAQ Section
Key answers for professionals selecting the CP-FELCFM-202 FE-Line Low CFM system.
No reviews yet. Be the first to review this product!