C.A. Tech CP-CSLP Spray Gun
C.A. TECHNOLOGIES CAT SLP HVLP PRESSURE-FEED SMART PACK
C.A. Technologies CP-CSLP CAT SLP HVLP Spray Gun Smart Pack combines the stainless-steel-fluid-passage CSLP pressure-feed gun with 0.8, 1.3, and 1.7 mm needle/nozzle setups, two air caps, tools, and case for versatile professional finishing work.
CP-CSLP is manufactured by C.A. Technologies, not Titan Tool. The Smart Pack supplies three fluid setups and two air caps but does not include a pressure cup. It is designed for connection to a suitable regulated pressure-feed material source and compressed-air supply.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-CSLP is the Smart Pack configuration of the C.A. Technologies CAT SLP pressure-feed HVLP spray gun. The package includes the CSLP gun, three needle/nozzle setups, two air caps, service tools, and case. Standard supplied fluid sizes are 0.8, 1.3, and 1.7 mm. A pressure cup is not included in this Smart Pack. |
| Function | The CSLP is a pressure-feed HVLP manual spray gun that receives coating from a separately pressurized material source while regulated atomizing air forms the spray pattern. C.A. Technologies specifies 13.5 CFM at 29 PSI maximum gun inlet pressure and describes the HVLP platform as providing 65% transfer efficiency or better. |
| Industrial Applications | Designed for professional wood, metal and general industrial finishing. The CSLP is particularly suited to spray stains, NGR applications, toner stains and work requiring consistent color matching. Its available fluid-size range also supports compatible clears, sealers, topcoats, primers and other properly reduced finishing materials. |
| Accurate Compatible Titan Machines | CP-CSLP is not a Titan OEM component and has no verified model-specific Titan sprayer fitment. It is a C.A. Technologies pressure-feed compressed-air spray gun. Operation requires a suitable regulated compressed-air source plus a compatible pressure cup, pressure tank, pump, or other controlled low-pressure fluid-supply system. |
| Accurate Part Number | C.A. Technologies CP-CSLP — CAT SLP Smart Pack. It is distinct from CP-CSLP-303-R2, which adds a 1-quart aluminum pressure cup and regulator, and CP-CSLP-PPS-R2, which adds a 1-quart PPS pressure cup and regulator. Single-setup CSLP guns are identified separately within the CSLP-XX-XXXX family. |
| Compatible Parts & Assemblies | The CSLP platform supports documented 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.7, 1.9 and 2.2 mm fluid-nozzle sizes with corresponding 23-13xx air caps. CP-CSLP supplies 0.8, 1.3 and 1.7 mm setups plus two air caps. Gun connections are 1/4-inch NPS male air and 3/8-inch NPS male fluid. |
| Related Parts Commonly Serviced Together | Inspect the installed fluid needle/nozzle combination, corresponding air cap, fluid seals and packing, air valve, fan-control components, trigger, pressure-feed hose and material-supply connections during service. C.A. Technologies specifies repair kit 10-106 for the CAT SLP / CSLP spray-gun platform. |
| Common Problems Solved | The three included fluid setups let a finishing shop configure one gun for different material viscosities rather than purchasing several single-setup guns. The CSLP's low-pressure design is specifically intended to improve stain and toner application consistency and reduce haloing and mottling associated with poorly controlled atomization. |
| Use with Coating Systems | The 0.8 mm configuration is especially relevant to fine spray-stain and toner work. The 1.3 mm setup expands the package into many compatible finishing and topcoat materials, while 1.7 mm provides additional capacity for heavier compatible coatings. Select the fluid setup according to coating viscosity, required film build and the coating manufacturer's application data. |
| OEM & Brand Information | CP-CSLP is manufactured by C.A. Technologies, not Titan Tool. The full-size CAT SLP gun weighs approximately 20 ounces, uses all stainless-steel fluid passages and a patented two-piece nozzle design, and incorporates a 12-point air-diffusion design intended to improve pattern coverage, process capability and color consistency. |
| Commercial Benefits | Professional finishers receive three fluid configurations and two air caps in one Smart Pack while retaining freedom to select the pressure cup, tank or pumping system best suited to production requirements. The broad CSLP nozzle range, stainless-steel wetted components and HVLP operation make it a versatile platform for production finishing and color-critical coating work. |
Contractor Selection Insight
Choose CP-CSLP when you already have, or want to select separately, the pressure-feed material source for your shop. The Smart Pack gives you the CSLP gun with 0.8, 1.3 and 1.7 mm setups without forcing a particular pressure cup configuration. For a ready-matched 1-quart system, compare CP-CSLP-303-R2 with its aluminum pressure cup or CP-CSLP-PPS-R2 with its PPS pressure cup.
FAQ Section
Key answers for professionals selecting the CP-CSLP Smart Pack.
No reviews yet. Be the first to review this product!