C.A. Tech CA-T2 Spray Gun
C.A. TECHNOLOGIES T2 PROFESSIONAL MINI HVLP SPRAY GUN
C.A. Technologies CA-T2 T2 HVLP Gravity-Feed Mini Spray Gun Kit is a compact professional touch-up system with 0.8, 1.2, and 1.3 mm nozzle/needle sets. Its 4 CFM air requirement and adjustable 4-inch pattern support stains, topcoats, detailing, and precision finishing.
CA-T2 is manufactured by C.A. Technologies, not Titan Tool. The standard kit includes 0.8, 1.2 and 1.3 mm nozzle/needle sets, a 150 mL aluminum cup, 125 mL plastic cup, cleaning brush and wrench. The gun weighs approximately 15 ounces and is designed for professional detail and touch-up spraying.
C.A. TECHNOLOGIES T2 PROFESSIONAL MINI HVLP SPRAY GUN
C.A. Technologies CA-T2 T2 HVLP Gravity-Feed Mini Spray Gun Kit
Handle professional touch-ups, spray stains and detailed finishing with C.A. Technologies CA-T2, a compact gravity-feed HVLP kit requiring only 4 CFM and supplied with three nozzle/needle sizes, two material cups and an adjustable spray pattern reaching approximately four inches.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CA-T2 is the standard C.A. Technologies T2 professional mini gravity-feed HVLP spray-gun kit. It includes three interchangeable nozzle/needle configurations—0.8, 1.2 and 1.3 mm—plus a 150 mL aluminum cup, 125 mL plastic cup, cleaning brush and universal wrench. The compact platform is designed specifically for professional-grade touch-up and detail finishing. |
| Function | Material flows from the gravity cup into the selected fluid nozzle while regulated compressed air atomizes the coating at the air cap. Pattern air is controlled at the gun: closing the pattern-adjustment valve produces a round pattern, while opening it progressively creates a wider, flatter fan. This allows the operator to adapt the pattern to small surfaces and localized finishing work. |
| Industrial Applications | Designed for professional touch-up, detailing, spray staining and other small-area finishing work. C.A. Technologies specifies the T2 for coatings ranging from topcoats to stains. Its compact body and approximately 4-inch maximum fan make it particularly useful for cabinetry, furniture, millwork, metal finishing, localized repairs, profiles, edges and smaller workpieces. |
| Accurate Compatible Titan Machines | CA-T2 is manufactured by C.A. Technologies and is not a model-specific Titan replacement spray gun. No direct Titan sprayer fitment is specified for this product. It operates from a suitable clean, regulated compressed-air supply rather than an airless pump or turbine hose, so it should not be treated as a replacement gun for Titan airless or Titan turbine HVLP systems. |
| Accurate Part Number | C.A. Technologies CA-T2. This is the standard T2 kit with 0.8, 1.2 and 1.3 mm spray nozzle/needle sets. It is distinct from CA-T2-GLAZE, which substitutes a dedicated glaze nozzle for the standard 0.8 mm spray setup while retaining 1.2 and 1.3 mm spray configurations. |
| Compatible Parts & Assemblies | Standard components include CA60-T2-30-08 0.8 mm, CA60-T2-30-12 1.2 mm and CA60-T2-30-13 1.3 mm nozzle/needle sets; 51-406 150 mL aluminum cup; 51-407 125 mL plastic cup; and CA60-T2-22 universal wrench. Additional T2 options include CA60-T2-30-10 1.0 mm nozzle/needle set, 51-408 450 mL aluminum cup and CA91-573 adapter for a compatible 3M PPS cup system. |
| Related Parts Commonly Serviced Together | Inspect the installed needle/nozzle set and air cap together when atomization or spray-pattern quality deteriorates. Other service points include the PTFE needle packing, air-adjusting valve, pattern-adjustment components, trigger and gravity cup. C.A. Technologies identifies CA60-T2-10 as the repair kit for the T2 platform. |
| Common Problems Solved | The T2 addresses jobs where a full-size production gun creates an unnecessarily large fan or consumes more compressed air than required. Its approximately 4-inch pattern improves control on small areas, while three included fluid setups let the finisher adapt material delivery to different compatible coatings. Low 4-CFM consumption also reduces compressor demand for detail work. |
| Use with Coating Systems | C.A. Technologies specifies approximately 10 PSI operating pressure at the gun and 4 CFM airflow for the T2. The gun uses a 1/4-inch male air inlet and a 16 mm × 1.0 mm male fluid/cup connection. Manufacturer literature describes the T2 as HVLP with transfer efficiency of 65% or better. Actual coating viscosity should be matched to the appropriate nozzle size and material manufacturer's recommendations. |
| OEM & Brand Information | CA-T2 is manufactured by C.A. Technologies, a brand of the WAGNER Group, and is not manufactured by Titan Tool. Manufacturer specifications identify the T2 as a 15-ounce professional mini gravity-feed HVLP gun with low 4-CFM air consumption, PTFE needle packing, an air-adjusting valve, quick pattern control and interchangeable twist-top gravity cups. |
| Commercial Benefits | CA-T2 provides three fluid setups and two cup sizes in one compact professional kit, reducing the need to dedicate a full-size gun to small finishing jobs. Its low airflow demand, adjustable four-inch pattern and gravity-feed design make it especially practical for shops that regularly perform touch-ups, detail coating, spray staining and small-component finishing. |
Contractor Selection Insight
Choose CA-T2 when the job involves spray stains, topcoats, touch-ups or detailed finishing where a full-size gun is unnecessarily large. Its 0.8, 1.2 and 1.3 mm setups provide useful material flexibility, while the 4-CFM requirement makes it practical with many smaller compressors. If you also need to lay glaze directly into profiles without atomizing air, compare the separate CA-T2-GLAZE package.
FAQ Section
Key answers for professional finishers selecting the CA-T2 spray gun kit.
No reviews yet. Be the first to review this product!