StatiKit part 0128217 is an Aircoat Nozzle 11/20 Flat designed for use with the StatiKit 2000 electrostatic spray system. This precision nozzle delivers a flat spray pattern with an 11/20 orifice size, optimized for applying low- to medium-viscosity coatings with precise control and excellent atomization. Replace worn or clogged nozzles to maintain consistent spray quality and electrostatic transfer efficiency.
| Part Number | 0128217 ( Replaces Titan 0143217 ) |
|---|---|
| Part Description | Aircoat Nozzle 11/20 Flat |
| Brand | StatiKit |
| Fits | StatiKit 2000 Electrostatic System |
| Condition | New |
The StatiKit 0128217 Aircoat Nozzle (11/20 Flat) is a precision spray tip designed for the StatiKit 2000 electrostatic spray system. The "11/20" designation indicates a 0.011-inch orifice with a 20-degree fan angle, producing a narrow flat spray pattern ideal for applying low- to medium-viscosity coatings—such as stains, lacquers, and sealers—with precise control and high transfer efficiency.
The narrower 20-degree fan angle makes this nozzle particularly suitable for coating smaller parts, tight spaces, or applications requiring a more concentrated spray pattern. Electrostatic spraying relies on a properly shaped and atomized spray to achieve optimal wrap-around and material savings. A worn, damaged, or incorrectly sized nozzle can lead to poor atomization, reduced electrostatic effect, uneven coverage, and increased overspray.
| Spray pattern control | Produces a consistent 20° flat fan pattern for precise, concentrated coverage |
|---|---|
| Atomization | Breaks coating into fine droplets for optimal electrostatic charging |
| Flow regulation | 11/20 orifice size delivers precise material volume for detailed applications |
| Worn orifice | Overspray, uneven pattern, or increased flow due to tip wear |
|---|---|
| Clogged or damaged | Partial blockages or nicks that distort the spray pattern |
| Reduced transfer efficiency | Poor wrap-around or excessive overspray during electrostatic application |
| Material change | Switching to a different coating that requires a different orifice size or pattern |
StatiKit part 0128217 is specifically designed for use with the StatiKit 2000 electrostatic spray system. It is compatible with all standard and optional configurations of the StatiKit 2000 that accept Aircoat series nozzles.
| Compatible System | Application |
|---|---|
| StatiKit 2000 Electrostatic System | Aircoat Nozzle 11/20 Flat |
* Always verify compatibility with your specific gun configuration and coating type.
When replacing the nozzle, it's good practice to inspect these related components to ensure optimal system performance.
Protects the nozzle tip; replace if damaged or if the seal is compromised.
Worn needle or seat can cause dripping or inconsistent flow; inspect and replace as needed.
Affects atomization and pattern shaping; clean or replace if clogged or damaged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
