Titan 9971470 O-Ring
OEM Titan Sealing Component
Titan 9971470 O-Ring is an OEM precision seal used in fluid sections, valve assemblies, and manifold connections on compatible Elite and PowrLiner sprayers, preventing fluid leaks and maintaining hydraulic pressure.
Compatibility Table
A worn, cracked, or flattened O-ring causes fluid leaks, loss of prime, pressure instability, or air ingestion. Replacing it restores leak-free sealing and reliable sprayer performance.
Titan Fluid Section Replacement Part
Titan 9971470 O-Ring for Elite and PowrLiner Fluid Sealing
Titan 9971470 is an OEM 20x2mm nitrile O-ring that provides a leak-proof seal in fluid sections, valve assemblies, and manifold connections on compatible Elite and PowrLiner sprayers.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan O-ring (20x2mm, Buna-N/nitrile) used in fluid sections, valve assemblies, and manifold connections of compatible Elite and PowrLiner sprayers. |
| Function | Creates a static or dynamic seal that prevents coating material from leaking and stops air from entering the fluid system; maintains hydraulic pressure by blocking bypass paths. |
| Industrial Applications | Professional airless sprayer repair, fluid section maintenance, valve assembly service, and rental fleet servicing. |
| Compatible Titan Machines | Elite 3000, Elite 3500, Elite 3500 72v, Elite 5500; PowrLiner 3000, 3500, 3500 72v, 4500, 5500. |
| OEM Part Number | 9971470 O-Ring (20x2mm, Buna-N/nitrile). |
| Compatible Parts & Assemblies | Used in the outlet valve assembly alongside the seat (341327), ball (9941501), seal (341347), spring (341326), and spring support ring (253405). |
| Related Parts Commonly Serviced Together | Other O-rings, seals, gaskets, and valve components should be inspected whenever a fluid connection is disturbed. |
| Common Problems Solved | External fluid leaks at connections, loss of prime, difficulty priming, pressure instability, air ingestion, and foaming material caused by a compromised seal. |
| Target Users / Markets | Painting contractors, maintenance technicians, rental fleets, and repair shops running compatible Titan sprayers. |
| OEM & Brand Information | Genuine Titan OEM component manufactured from chemical-resistant Buna-N/nitrile rubber for reliable sealing and long service life. |
| Commercial Benefits | Restores leak-free operation, maintains system pressure, prevents contamination, and supports consistent spray performance. |
The 9971470 O-Ring is a direct replacement for worn or damaged seals on compatible Titan sprayers. During service, inspect the O-ring for cuts, nicks, flattening, hardening, or compression set. Always lubricate the O-ring with a compatible grease or pump oil before installation to prevent pinching and ensure proper seating. Replace O-rings whenever a fluid connection is disturbed, as even a visually intact seal may have taken a permanent set. Check mating surfaces for nicks or corrosion that could compromise the new seal. A properly seated O-ring prevents fluid leakage and maintains the pressure required for consistent spray performance.
Frequently Asked Questions
Practical answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!