Titan 9871114 O-Ring
OEM Titan Seal Component
Titan 9871114 O-Ring is an OEM Teflon seal used in the outlet valve assembly of SprayTech AirCoat and ED655 Plus sprayer pumps, providing a leak-proof seal at the pump head connection.
Compatibility Table
OEM Teflon O-ring restores a positive seal at the outlet valve, preventing fluid leaks and maintaining pump pressure.
Titan Seal Component Replacement
Titan 9871114 O-Ring for AirCoat & ED655 Plus Outlet Valve
Titan 9871114 is an OEM Teflon O-ring used in the outlet valve assembly of compatible sprayer pumps, creating a reliable seal between the outlet fitting and the paint pump.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan Teflon O-ring used in the outlet valve assembly of compatible Sprayer pumps. |
| Function | Creates a leak-proof seal between the outlet fitting and the paint pump. Prevents fluid or air from escaping at the joint, maintaining system pressure and preventing drips. |
| Specification | Teflon O-ring, .614 ID x .754 OD. Made from flexible material formulated to resist degradation from solvents, paints, and cleaning agents. |
| Compatible Models | SprayTech AirCoat, SprayTech ED655, SprayTech ED655 Plus. |
| OEM Part Number | 9871114 O-Ring (also referenced as 09871114). |
| Related Parts Commonly Serviced Together | Outlet seal, ball guide, valve seat, ball (carbide), and outlet spring. Inspect mating surfaces and grooves for damage during replacement. |
| Common Problems Solved | Visible fluid leaks at joints, difficulty building pressure, hardening or cracking of the O-ring, compression set, and air bubbles in the fluid. |
| Commercial Benefits | Restores a positive seal, prevents leaks, maintains pump pressure, and ensures reliable sprayer operation. A low-cost repair that protects more expensive pump components. |
The 9871114 O-Ring is a small but critical sealing component in the outlet valve assembly. Over time, O-rings can become hard, brittle, or cracked due to chemical exposure, temperature cycles, or compression set. A damaged O-ring will allow fluid or air to escape, leading to poor performance, dripping, or loss of pressure. When replacing, ensure the groove is clean and free of debris, and lubricate the new ring if required.
Frequently Asked Questions
No reviews yet. Be the first to review this product!