Titan part 945-022 is a valve housing used in the fluid section or manifold assembly on compatible PowrTwin, PowrTex, PowrBeast, Hydra, and Hydra X sprayers. It houses the valve components (ball, seat, spring) that control fluid flow direction. Replace when the housing is cracked, warped, or corroded.
| Part Number | 945-022 |
|---|---|
| Part Description | Valve Housing |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 945-022 Valve Housing is a critical fluid control component that contains the check valve assembly (ball, seat, and spring) in the pump manifold or fluid section. It ensures that material flows in only one direction – from the inlet to the outlet – preventing backflow and maintaining prime.
A cracked, warped, or corroded valve housing can cause loss of prime, erratic spray, pressure loss, or fluid leakage. Replacing with a genuine housing restores proper valve alignment and sealing integrity.
| Houses valve assembly | Contains ball, seat, and spring for one‑way flow control |
|---|---|
| Prevents backflow | Stops fluid from returning to the supply container |
| Maintains prime | Keeps the pump ready to spray without re‑priming |
| Cracks or splits | Visible damage that causes air ingestion or fluid leaks |
|---|---|
| Warped sealing face | Housing no longer flat, preventing valve from seating |
| Corrosion / pitting | Internal corrosion that damages the valve seat surface |
| Stripped threads | Threads that connect to pump or manifold are damaged |
Titan part 945-022 is a direct replacement valve housing for the following sprayers. Always confirm fitment using your equipment's parts diagram.
| Brand / Model | Components |
|---|---|
| Hydra M | Valve Housing |
| Hydra Pro Super | Valve Housing |
| Hydra X 4540 - 7230 | Valve Housing |
| PowrBeast 4700 | Valve Housing |
| PowrBeast 7700 | Valve Housing |
| PowrBeast 9700 | Valve Housing |
| PowrBeast 4700T | Valve Housing |
| PowrTex 6900SF | Valve Housing |
| PowrTex 12000SV | Valve Housing |
| PowrTwin 12000 Plus DI | Valve Housing |
| PowrTwin 6900XLT DI | Valve Housing |
| PowrTwin 6900 | Valve Housing |
When replacing the valve housing, inspect these associated components.
The internal check valve components wear over time. Replace them together with the housing.
Seals between the housing and pump/manifold should be replaced to prevent leaks.
Check threads and sealing surfaces where the valve housing installs.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
