Titan 944-904 Tungsten Valve Seat
OEM Titan Valve Component
Titan 944-904 Tungsten Valve Seat is an OEM tungsten carbide component that provides a durable sealing surface for the check ball in the 944/945 series bleed valve assembly on compatible Admiral, PowrTwin, PowrLiner, Hydra M, Hydra Pro, PowrCoat, and Commander spray systems.
Compatibility Overview
Tungsten carbide is one of the hardest materials used in valve applications, offering exceptional resistance to abrasion, corrosion, and deformation. A smooth, perfectly round, and extremely hard seat is essential for achieving a positive seal and reliable valve operation. Replace if the seat shows visible wear, pitting, or damage.
Titan Bleed Valve Seat Replacement
Titan 944-904 Tungsten Valve Seat for Bleed Valve Assembly Service
Titan 944-904 is an OEM tungsten carbide valve seat designed for the 944/945 series bleed valve assembly on compatible Admiral, PowrTwin, PowrLiner, Hydra M, Hydra Pro, PowrCoat, and Commander spray systems. Listed as item 7 "Valve seat" in the official Titan parts breakdown for the 944-620 Bleed Valve Assembly, this precision component provides an exceptionally durable sealing surface for the check ball, ensuring reliable pressure relief and preventing backflow. Tungsten carbide is one of the hardest materials used in valve applications, offering exceptional resistance to abrasion, corrosion, and deformation. A smooth, perfectly round, and extremely hard seat is essential for achieving a positive seal and reliable valve operation in demanding environments. According to Titan service instructions, the tungsten carbide seat should not require frequent replacement. The tungsten carbide ball, in normal service, will last a long time because it rotates and wears evenly. If there is leakage, replace the ball first. If the valve seat shows visible wear, pitting, or damage, replace it with this genuine part. During service, open the adjustment knob to full counterclockwise position before unthreading the valve seat from the valve body. All non-moving threads must be assembled with Loctite sealant (Titan part #426-051).
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan tungsten carbide valve seat that provides a durable sealing surface for the check ball in the 944/945 series bleed valve assembly. |
| Function | Provides the sealing surface against which the tungsten carbide check ball seats during operation. Tungsten carbide offers exceptional resistance to abrasion, corrosion, and deformation. A smooth, perfectly round, and extremely hard seat is essential for achieving a positive seal and reliable valve operation. |
| System Location | Bleed valve assembly, item 7. Listed in official Titan parts breakdowns for the 944-620 Bleed Valve Assembly. |
| Documented Compatible Models | Admiral 944-620 Bleed Valve Assembly; Hydra M2000, M4000; Hydra Pro Super; PowrTwin 12000GHD, 12000GH, 8900GH, 6900GH, 4900GH, 4500, 3500; PowrLiner 8900, 6000, 5000, 4900, 4000; PowrCoat 730, 745, 940, 960, 975; Commander. Verify your exact model against the parts diagram. |
| OEM Part Number | 944-904 Tungsten Valve Seat. |
| Common Problems Solved | Loss of system pressure, reduced output, backflow through the valve, and visible wear or pitting on the valve seat surface. |
| Replacement Indicators | Replace if the valve seat shows visible wear, pitting, or damage. The tungsten carbide seat should not require frequent replacement, but if leakage is observed, inspect both the seat and the ball. |
| Related Parts Commonly Serviced Together | Valve body (944-020), O-ring (944-004), valve stem stop (944-026), tungsten carbide ball (761-715), copper gasket (945-003), knob assembly (944-024). |
| Installation Notes | Open the adjustment knob to full counterclockwise position before unthreading the valve seat from the valve body. All non-moving threads must be assembled with Loctite sealant (Titan part #426-051). |
The 944-904 Tungsten Valve Seat is a critical sealing component in the bleed valve assembly. Titan service instructions note that the tungsten carbide seat should not require frequent replacement. If leakage occurs, replace the tungsten carbide ball first, as it is designed to wear evenly. If the seat shows visible wear, pitting, or damage, replace it with this genuine part. Always open the adjustment knob fully counterclockwise before unthreading the seat, and apply Loctite sealant to non-moving threads during reassembly. Verify model compatibility against your Titan service manual, as bleed valve configurations vary across sprayer platforms.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!