Titan part 944-011 is a valve stem used in the inlet or outlet valve assembly on compatible PowrTwin, PowrTex, PowrLiner, and PowrBeast sprayers. This replacement stem restores proper valve sealing and flow control when the original becomes worn, bent, or corroded.
| Part Number | 944-011 |
|---|---|
| Part Description | Valve Stem |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 944-011 Valve Stem is a genuine OEM replacement component used in the inlet and outlet valve assemblies on compatible PowrTwin, PowrTex, PowrLiner, and PowrBeast sprayers. The valve stem works with the spring, ball, and seat to control paint flow and maintain pressure.
Over time, valve stems can become bent, worn at the sealing surface, or corroded due to paint exposure and mechanical cycling. A damaged valve stem can cause pressure loss, poor priming, or failure to hold pressure when the gun is closed. Replacing the valve stem restores proper sealing and reliable pump performance.
| Sealing interface | Provides a precision surface that mates with the valve seat |
|---|---|
| Stroke transmission | Transfers spring force to the ball or poppet for proper sealing |
| Flow control | Opens and closes with pressure changes to regulate paint flow |
| Bent or distorted | Stem no longer moves freely or seats squarely |
|---|---|
| Worn sealing surface | Grooves, pitting, or uneven wear on the contact face |
| Corrosion | Rust or chemical attack affecting stem diameter or finish |
| Pressure loss | Sprayer fails to hold pressure or cycles excessively |
Titan part 944-011 is compatible with the following models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| PowrTwin TM 8900 XLT | Valve Stem |
| PowrTwin 12000XLT | Valve Stem |
| PowrTwin 12000XLT DI | Valve Stem |
| PowrTwin 12000 Plus DI | Valve Stem |
| PowrTwin 6900XLT | Valve Stem |
| PowrTwin 6900XLT DI | Valve Stem |
| PowrTwin 4900XLT | Valve Stem |
| PowrTwin 6900 | Valve Stem |
| PowrTwin 4900 | Valve Stem |
| PowrTwin 8900 | Valve Stem |
| PowrTwin 12000Plus | Valve Stem |
| PowrTex 6900SF | Valve Stem |
| PowrTex 12000SV | Valve Stem |
| PowrLiner 8900XLT | Valve Stem |
| PowrLiner 8900XLT SP | Valve Stem |
| PowrLiner 6950 | Valve Stem |
| PowrLiner 6900 XLT | Valve Stem |
| PowrLiner 6900 XLT SP | Valve Stem |
| PowrLiner 4950 | Valve Stem |
| PowrLiner 4900XLT | Valve Stem |
| PowrLiner 4955 | Valve Stem |
| PowrLiner 6955 | Valve Stem |
| PowrLiner 8955 | Valve Stem |
| PowrBeast (Model No 4700) | Valve Stem |
| PowrBeast (Model No 7700) | Valve Stem |
| PowrBeast (Model No 9700) | Valve Stem |
| PowrBeast (Model No 4700T) | Valve Stem |
When replacing the valve stem, inspect and replace these related components.
Loss of spring tension can cause poor sealing even with a new stem.
Scratched or out‑of‑round balls will not seal properly against the seat.
Worn seats or hardened O‑rings are common causes of pressure loss.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
