Titan part 944-009 is a valve housing that contains the inlet and outlet valve components on compatible PowrTwin, PowrLiner, and PowrBeast sprayers. This replacement housing restores proper valve alignment and sealing when the original becomes cracked, worn, or corroded.
| Part Number | 944-009 |
|---|---|
| Part Description | Valve Housing |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 944-009 Valve Housing is a genuine OEM replacement housing that contains the inlet and outlet valve assemblies on compatible PowrTwin, PowrLiner, and PowrBeast sprayers. This housing provides the precision‑machined bores and sealing surfaces necessary for proper valve operation and pressure holding.
Over time, valve housings can develop cracks, corrosion, or wear in the sealing areas, leading to pressure loss, poor priming, or external leaks. Replacing a damaged valve housing restores proper valve alignment and ensures reliable pump performance.
| Valve containment | Houses the inlet and outlet valve components (ball, spring, seat) |
|---|---|
| Fluid sealing | Provides sealing surfaces for valves to prevent backflow |
| Flow direction | Channels paint from inlet to piston and outlet to hose |
| Cracks or fractures | Visible cracks in the housing body, especially near ports |
|---|---|
| Corrosion / pitting | Rust or chemical damage on sealing surfaces |
| Worn valve bores | Oval or scored bores prevent valves from seating properly |
| External leaks | Paint seeps from housing seams or around fittings |
Titan part 944-009 is compatible with the following models. Always verify with your machine's parts diagram.
| Brand / Model | Component |
|---|---|
| PowrTwin 12000 Plus DI | Valve Housing |
| PowrTwin 6900 | Valve Housing |
| PowrTwin 4900 | Valve Housing |
| PowrTwin 8900 | Valve Housing |
| PowrTwin 12000 Plus | Valve Housing |
| PowrLiner 8900 XLT SP | Valve Housing |
| PowrLiner 6950 | Valve Housing |
| PowrLiner 4950 | Valve Housing |
| PowrLiner 4955 | Valve Housing |
| PowrLiner 6955 | Valve Housing |
| PowrLiner 8955 | Valve Housing |
| PowrBeast (Model No 4700) | Valve Housing |
| PowrBeast (Model No 7700) | Valve Housing |
| PowrBeast (Model No 9700) | Valve Housing |
| PowrBeast (Model No 4700T) | Valve Housing |
When replacing the valve housing, inspect and replace these related components.
Includes spring, ball, seat, and seals. Replace with housing for proper sealing.
Same as inlet kit – both should be replaced when the housing is changed.
Worn packings can cause pressure loss that mimics valve housing failure.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
