Titan 940-553 Valve Ball
OEM Titan Flow Control Element
Titan 940-553 Valve Ball is an OEM high-pressure ball valve component used in filter assemblies and gun manifold assemblies on compatible PowrTwin, PowrLiner, PowrCoat, and Hydra sprayer models.
Compatibility Overview
Provides reliable one-way flow control in high-pressure filter and manifold circuits. A worn, pitted, or damaged ball causes pressure loss, backflow, and inconsistent spray performance. OEM replacement restores proper valve sealing and flow control.
Titan Flow Control Element Replacement
Titan 940-553 Valve Ball for Filter and Manifold Assembly Service
Titan 940-553 is an OEM high-pressure ball valve component used in filter assemblies and gun manifold assemblies on compatible Titan airless sprayers. Listed as "Ball valve" in the Filter Assembly section of the official PowrLiner 9900XLT manual, this precision component provides reliable one-way flow control in high-pressure fluid circuits. It is documented as a common wear part in the PowrTwin 4900 Gun Manifold Assemblies, where it must be inspected and replaced as needed due to the high pressures involved. Authorized parts databases cross-reference the 940-553 for extensive compatibility across PowrTwin 3500 through 12000 series, PowrLiner 4950 through 9900XLT series, PowrCoat 940/960, and Hydra M2000/M4000/Pro IV/Pro Super models. Over time, valve balls can become worn, pitted, or damaged from pressure cycling and abrasive materials, causing pressure loss, backflow, and inconsistent spray performance. This genuine OEM replacement restores proper valve sealing, reliable flow control, and safe operation. Always verify compatibility against your specific sprayer's parts diagram, as manifold and filter configurations vary across models and production revisions.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan high-pressure ball valve component for filter assemblies and gun manifold assemblies on compatible airless sprayers. |
| Function | Provides reliable one-way flow control in high-pressure fluid circuits. Maintains proper valve sealing and prevents backflow in filter and manifold applications. |
| System Location | Filter Assembly (PowrLiner 9900XLT) and Gun Manifold Assemblies (PowrTwin 4900). |
| Documented Compatible Models | PowrTwin 12000/12000XLT/12000XLTDI, 8900/8900GH/8900XLT, 6900/6900XLT, 5500, 4900/4900XLT, 4500, 3500/3500-DC/3500S; PowrLiner 9900XLT, 8955, 8950, 8900XLT/8900XLTSP, 6955, 6950, 6900XLT, 6000, 5000, 4955, 4950; PowrCoat 940, 960; Hydra M2000, M4000, Hydra Pro IV, Hydra Pro Super. Verify your exact model against the parts diagram. |
| OEM Part Number | 940-553 Valve Ball. |
| Common Problems Solved | Pressure loss, backflow, inconsistent spray performance, and valve sealing failure caused by worn, pitted, or damaged balls. |
| Replacement Indicators | Visible wear, pitting, scoring, or loss of roundness. Replace if the ball fails to seal properly or if pressure loss is observed. |
| Related Parts Commonly Serviced Together | Ball valve (941-555), hex nipple (814-002), manifold block (970-100), outlet fitting (227-006). |
| Installation Notes | Inspect the valve seat for damage before installing a new ball. Ensure the ball moves freely and seats properly. Always relieve system pressure before servicing. |
The 940-553 Valve Ball is a critical flow control component in filter and manifold assemblies. If you observe pressure loss, backflow, or inconsistent spray performance, inspect the valve ball for wear or damage. This is a common wear part that must be inspected and replaced as needed due to high-pressure operation. Always verify model compatibility against your Titan service manual or parts diagram, as manifold and filter configurations vary across sprayer platforms.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!