Titan 920-554 Filter Assembly,50 Mesh (Long)
OEM Titan Filtration Component
Titan 920-554 Filter Assembly is an OEM extended-length 50-mesh outlet filter that removes coarse particles and contaminants from the fluid stream before they reach the spray tip, ensuring a clean, defect-free finish in high-volume Admiral and PowrCoat spray systems.
Compatibility Table
A clogged or damaged filter causes tip clogging, poor atomization, spray pattern defects, and reduced performance. Replacing it restores proper filtration and consistent finish quality.
Titan Filtration Component
Titan 920-554 Filter Assembly, 50 Mesh (Long) for High-Volume Spray Systems
Titan 920-554 is an OEM extended-length filter assembly designed for high-volume Titan spray systems, including Admiral and PowrCoat platforms. It is listed as "Filter assembly, outlet" in the Admiral product manual and appears in the Speeflo Admiral parts list alongside the 840-205 outlet assembly. The 50-mesh screen captures particles approximately 300 microns and larger, removing coarse contaminants from the coating material before it reaches the spray gun. This helps prevent tip clogging, ensures smooth atomization, and supports a defect-free finish. The extended "Long" design accommodates higher flow rates required for continuous production spraying. It is suitable for latex paints, primers, stains, acrylics, elastomerics, industrial enamels, and high-volume protective coatings. Regular inspection and replacement of the filter assembly are essential to maintaining optimal fluid cleanliness and consistent spray performance. When using a filter, ensure the mesh size is appropriate for the coating material, and replace it if damaged or if flow becomes restricted. Always verify fitment against your specific model and serial number before ordering.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan extended-length filter assembly designed to capture and remove particles larger than 50 mesh from the fluid stream in high-volume spray systems. |
| Function | Removes coarse contaminants from coating material before it reaches the spray gun. The 50-mesh rating captures particles approximately 300 microns and larger, helping prevent tip clogging and ensuring a smooth, defect-free finish. The extended design accommodates higher flow rates. |
| Industrial Applications | Large-scale commercial painting, industrial coatings, manufacturing facilities, and high-output production environments. |
| Compatible Titan Systems | Admiral series and PowrCoat high-volume spray systems where extended filtration is required. |
| OEM Part Number | 920-554 Filter Assembly, 50 Mesh (Long). |
| Related Parts Commonly Serviced Together | Filter seals, O-rings, filter bowl components, and the outlet assembly (840-205A). |
| Common Problems Solved | Tip clogging, poor atomization, spray pattern defects, surface imperfections from debris, and reduced spray performance due to contamination. |
| Use with Coating Systems | Latex paints, primers, stains, acrylics, elastomerics, industrial enamels, and high-volume protective coatings. |
| Target Users / Markets | Industrial and commercial spray operations, professional painting contractors, maintenance technicians, and facilities requiring consistent filtration and reliable spray performance. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fitment in high-volume spray systems. The 50-mesh rating provides balanced filtration—coarse enough to maintain flow while capturing visible debris. |
| Commercial Benefits | Captures large contaminants, prevents tip clogging, ensures a defect-free finish, reduces rework, and supports continuous high-output production. |
The 920-554 Filter Assembly is a direct replacement for worn or clogged outlet filters on compatible Admiral and PowrCoat spray systems. During service, follow the pressure relief procedure first. Remove the filter cap, pull the filter element straight out, and clean the inside of the element thoroughly with appropriate solvent. Inspect the element for damage and replace if necessary. When using a filter, ensure the mesh size is appropriate for the coating material. Regularly inspect and clean the filter assembly to maintain optimal performance, and replace it if damaged or if flow becomes restricted. Use genuine Titan components to ensure proper fit and reliable system operation.
Frequently Asked Questions
Practical answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!