Titan part 891-073 is a PTFE O‑ring, size 2-026, used as a high‑performance seal on compatible PowrTwin, PowrTex, Hydra, and Hydra X sprayers and pumps. PTFE (polytetrafluoroethylene) offers excellent chemical resistance and low friction, making it suitable for aggressive solvents and coatings.
| Part Number | 891-073 |
|---|---|
| Part Description | O-Ring, PTFE 2-026 |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 891-073 PTFE O‑ring (2-026) is a genuine OEM replacement seal made from polytetrafluoroethylene (PTFE). It is used in fluid sections, valve assemblies, manifolds, and other high‑performance sealing applications on PowrTwin, PowrTex, Hydra, and Hydra X sprayers and pumps.
PTFE O‑rings offer exceptional chemical resistance to solvents, paints, and aggressive coatings, as well as a low coefficient of friction for dynamic sealing applications. A worn, flattened, or damaged O‑ring can cause fluid leaks, pressure loss, or contamination. Replacing with the correct PTFE O‑ring restores a reliable, chemical‑resistant seal.
| Chemical resistance | Withstands aggressive solvents, paints, and coatings |
|---|---|
| Low friction | Ideal for dynamic seals on moving parts |
| Wide temperature range | Performs in high‑temperature and cryogenic applications |
| Fluid leak at seal location | Visible paint or solvent seepage |
|---|---|
| Flattened or deformed O‑ring | Loss of cross‑section from compression set |
| Hardening or brittleness | PTFE can become stiff over time, losing sealing ability |
| Nicks or cuts | Physical damage during assembly or from debris |
Titan 891-073 is compatible with the following models. Always confirm fitment using the parts diagram for your specific machine.
| Brand / Model | Component |
|---|---|
| PowrTwin 12000 Plus DI | PTFE O‑ring 2-026 |
| PowrTwin 6900 XLT DI | PTFE O‑ring 2-026 |
| PowrTwin 6900 | PTFE O‑ring 2-026 |
| PowrTex 6900SF | PTFE O‑ring 2-026 |
| PowrTex 12000SV | PTFE O‑ring 2-026 |
| Hydra M | PTFE O‑ring 2-026 |
| Hydra Pro Super | PTFE O‑ring 2-026 |
| Hydra X 4540 | PTFE O‑ring 2-026 |
| Hydra X 7230 | PTFE O‑ring 2-026 |
When replacing a PTFE O‑ring, these related components are often inspected or serviced at the same time.
PTFE O‑rings often used with backup rings in high‑pressure applications; inspect and replace if damaged.
Inspect for nicks, corrosion, or debris that could damage the new O‑ring.
Check for wear or damage that may have caused the original seal failure.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
