Titan part 817-003 is a tee fitting designed to split or combine fluid flow in hydraulic, coating, or air lines on compatible Hydra M, Hydra Pro Super, Admiral, Commander, PowrBeast, and PowrTwin sprayers and stripers. This fitting provides a reliable, leak‑tight branch connection, enabling proper routing of material to multiple components or pressure gauges. Replacing a cracked, stripped, or leaking tee fitting restores proper flow distribution, eliminates fluid loss, and ensures consistent system performance.
| Part Number | 817-003 |
|---|---|
| Part Description | Tee Fitting |
| Brand | Titan |
| Fits | Hydra M 2000, Hydra M 4000, Hydra Pro Super; Admiral (830‑331, 860‑451, 830‑451, 941‑441); Commander (741‑440, 761‑301, 761‑411, 741‑331); PowrBeast 4700, 7700, 9700; PowrTwin 6900, 12000 Plus DI |
| Condition | New |
The Titan 817-003 Tee Fitting is an OEM branch connector used to split a single fluid line into two paths or combine two lines into one on a wide range of Titan sprayers and stripers. It is manufactured from corrosion‑resistant material to withstand high pressures and harsh coating chemicals.
Over time, tee fittings can become cracked, cross‑threaded, or corroded. A damaged fitting causes fluid leaks, pressure drops, and erratic system behavior. Replacing with genuine Titan 817-003 restores a leak‑tight, unrestricted flow path, ensuring proper distribution to gauges, valves, or auxiliary outlets.
| Flow splitting | Divides fluid to multiple destinations |
|---|---|
| Flow combining | Joins two lines into one |
| Leak‑free connection | Provides reliable sealing under pressure |
| Cracks or fractures | Visible damage to fitting body |
|---|---|
| Cross‑threaded | Threads damaged, will not seal |
| Corrosion | Rust or chemical attack |
| Leakage | Fluid escaping from branch or ends |
Titan part 817-003 is compatible with the following models. Always confirm fitment using the correct parts diagram for your exact machine and serial number.
| Model Series / Name | Component |
|---|---|
| Hydra M 2000, Hydra M 4000, Hydra Pro Super | Tee Fitting |
| Admiral 830‑331, 860‑451, 830‑451, 941‑441 | Tee Fitting |
| Commander 741‑440, 761‑301, 761‑411, 741‑331 | Tee Fitting |
| PowrBeast 4700, 7700, 9700 | Tee Fitting |
| PowrTwin 6900, 12000 Plus DI | Tee Fitting |
When replacing a tee fitting, consider inspecting or replacing these associated components.
Inspect the hose ends for cuts or swelling; replace if damaged.
Apply fresh sealant when installing the new fitting to prevent leaks.
Check adjacent adapters for thread damage or corrosion.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
