Titan 805-464 Retainer
Keep your Titan equipment repair on track with the Titan 805-464 Retainer. This replacement retaining component is identified by its precise Titan part number for use in designated assemblies. Check your machine's illustrated parts diagram and inspect the surrounding hardware before ordering to ensure the correct replacement.
Service Inspection: Check for deformation, wear, cracks, and damaged contact surfaces.
Ordering: Match part number 805-464 to the correct Titan assembly diagram.
Fitment Note: Confirm the complete machine model, serial-number range, and assembly reference before purchasing. Compatibility with other Titan retainers is not implied.
Maintain Your Equipment with Titan 805-464 Retainer
Reliable equipment service begins with the correct replacement components. The Titan 805-464 Retainer is identified in Titan's illustrated pump-assembly parts lists, including documented Impact 1040, Impact 1140, and Helix configurations. It is a designated retaining component within the equipment assembly. Replace damaged or missing hardware with the specified part and follow the applicable Titan service manual for installation.
What Does Titan 805-464 Retainer Do?
The retainer is a designated piece of retaining hardware within selected Titan equipment assemblies. Titan identifies it separately from nearby springs, bolts, nuts, washers, and other service components.
Its precise mechanical engagement and installation arrangement must be determined from the applicable machine diagram. Using the correct retainer helps maintain the intended assembly configuration during repair and reassembly.
When Should Titan 805-464 Be Replaced?
Visible deformation: Replace a retainer that is bent, distorted, or no longer matches its required shape.
Cracks or breakage: Inspect damaged hardware and surrounding contact surfaces before installing a replacement.
Damaged engagement surfaces: Wear or mechanical damage may prevent proper retention.
Missing hardware: Restore the original assembly with the specified part number.
Equipment overhaul: Inspect the retainer and adjacent hardware during major servicing, replacing components according to their condition and the applicable manual.
Inspection & Replacement Guidance
1. Prepare the equipment. Turn off the machine, disconnect its power source, and perform the pressure-relief procedure prescribed by Titan.
2. Identify the correct assembly. Locate 805-464 in the exploded diagram corresponding to the machine model and configuration.
3. Inspect surrounding hardware. Check adjacent bolts, washers, springs, mounting surfaces, and other components shown in the applicable diagram.
4. Replace damaged parts. Follow the manufacturer-prescribed disassembly and reassembly sequence. Avoid substituting similar-looking hardware without verification.
5. Verify operation. Complete the applicable mechanical inspection and operational checks before returning the sprayer to service.
Related Components to Check During Service
Titan parts lists identify several components in the same equipment assemblies. Inspect only the parts applicable to your exact machine.
The neighboring component list is not a bill of materials for the retainer itself. Parts and quantities vary by machine.
Order Titan 805-464 Retainer
Find the replacement retaining hardware your Titan equipment requires at AllTitanParts. Confirm the part number against your machine's diagram and review any additional hardware needed to complete the service correctly.
Frequently Asked Questions
Answers to common questions about Titan 805-464 compatibility, maintenance, and ordering.
What is Titan 805-464 Retainer?
It is a retaining component identified in selected Titan equipment assembly parts lists.
Which Titan machines use 805-464?
Documented applications include Titan Impact 1040, Impact 1140, Helix A, and Helix B. Confirm the exact assembly revision before ordering.
Is Titan 805-464 interchangeable with other Titan retainers?
Interchangeability is not established by the product name alone. Use the exact part number or a verified manufacturer replacement reference.
Does this retainer fit every Titan Impact sprayer?
No. The documented applications do not establish compatibility across every Impact model or revision.
Are bolts, springs, and washers included?
The product listing identifies the retainer. Confirm package contents before ordering. Associated hardware may need to be purchased separately.
When should the retainer be replaced?
Replacement is appropriate when inspection identifies missing, cracked, distorted, or otherwise unserviceable retaining hardware.
Can I install Titan 805-464 myself?
Installation should follow the correct Titan service procedure. Personnel servicing pressurized spraying equipment should understand the required safety precautions.
No reviews yet. Be the first to review this product!
