Titan 805-451 Bushing
Restore proper handle alignment with the Titan 805-451 Bushing, a genuine replacement component used in compatible Titan Impact upright-cart assemblies. Positioned at the handle mounting connection, this bushing provides a supporting interface between adjoining components, helping reduce unwanted movement and wear. Titan's cart diagrams specify two bushings per assembly.
Assembly Location: Upright cart, handle mounting area.
Related Parts: Titan 805-206A Handle Assembly and 9805352 Shoulder Screw.
Small Component. Essential Handle Support.
The Titan 805-451 Bushing is a manufacturer-specified replacement used at the handle mounting area of compatible Titan Impact upright-cart sprayers. Its supporting surface helps maintain alignment between the handle and associated mounting components. When bushings become worn or damaged, replacing them can help correct unwanted looseness and protect adjoining parts from excessive wear.
How Does Titan 805-451 Bushing Work?
The bushing sits at the designated handle mounting connection within the upright-cart assembly. It provides an interface between adjoining components and helps maintain their intended relationship during normal handling.
A serviceable bushing helps limit unnecessary direct contact and wear at the connection. When the bushing becomes worn or damaged, the handle may develop excessive movement or lose its intended alignment.
The correct replacement should be selected by Titan part number rather than appearance alone, since similar-looking bushings may differ in dimensions and fit.
When Should the Bushing Be Replaced?
Excessive handle movement: Noticeable looseness at the mounting connection after checking the fasteners.
Visible wear: Scoring, deformation, cracking, or damage to the bushing surface.
Misalignment: The handle does not sit or move as intended because its supporting connection is worn.
Binding or rough movement: Unusual resistance at the handle connection caused by a damaged bushing or mating hardware.
Cart refurbishment: Replacement during a broader repair when inspection confirms bushing wear.
Inspection & Replacement Guidance
1. Prepare the equipment. Disconnect power, complete the manufacturer pressure-relief procedure, and stabilize the sprayer.
2. Confirm the correct part. Check the upright-cart diagram for 805-451 and verify that your machine uses two bushings.
3. Inspect both mounting points. Examine the bushings, shoulder screws, handle, and cart mounting surfaces for wear or deformation.
4. Remove worn components. Follow the applicable Titan service procedure and avoid damaging the handle or cart mounting areas.
5. Install the replacement. Fit the correct bushing and reassemble using the specified hardware and manufacturer instructions. Do not force an incorrect-size component into place.
6. Verify the repair. Confirm that the handle is securely mounted, correctly aligned, and free of abnormal looseness or binding before returning the equipment to use.
Order Titan 805-451 Bushing
Keep your Titan Impact sprayer's handle mounting connection properly supported with a genuine replacement bushing from AllTitanParts. Review the cart diagram, inspect both bushings and their shoulder screws, and order the quantity needed for your repair.
Frequently Asked Questions
Common questions about fitment, quantity, handle support, and replacement.
What is Titan 805-451 Bushing?
It is a replacement bushing used at the handle mounting connection in specified Titan upright-cart assemblies.
Which Titan sprayers use 805-451?
Official diagrams identify applications including Impact 740, 840, 1040T, 1140, and 1640. Additional I/IA variants are listed in the product catalog. Confirm your exact model.
How many bushings are used in one cart?
Titan's applicable upright-cart parts diagrams specify two 805-451 bushings per assembly.
Does ordering one bushing provide a pair?
The diagrams show how many are used in the cart, not the quantity included in a retail order. Check the product listing or packaging before ordering two replacements.
Is this bushing part of Titan 805-206A Handle Assembly?
It is associated with the handle mounting area but is listed separately from handle assembly 805-206A in the manufacturer cart diagrams.
Should I replace the shoulder screws at the same time?
Inspect both 9805352 shoulder screws. Replace them if worn, damaged, or otherwise unsuitable for reuse under the applicable service instructions.
Can worn bushings cause a loose handle?
Yes, wear at the bushing connection can contribute to looseness. Damaged fasteners, mounting points, or the handle itself may cause similar symptoms.
How do I verify the correct replacement?
Locate your machine's upright-cart exploded diagram and confirm item 3, part number 805-451. Check the model and serial number where applicable.
No reviews yet. Be the first to review this product!