Titan 805-324A Pump Block
OEM Titan Pump Component
Titan 805-324A Pump Block is an OEM structural housing that serves as the central fluid manifold and component housing for the pump system on compatible Titan sprayers, including the MultiFinish 440, Impact 440/640, and RentSpray 600 Impact.
Compatibility Table
Inspect the block for cracks, scoring, or thread damage during pump service. Replace if internal bores are worn beyond specification or if repeated seal failures occur.
Titan Pump Component Replacement
Titan 805-324A Pump Block for Sprayer Pump Service
Titan 805-324A is an OEM pump block designed as the central fluid manifold and component housing for the pump system on compatible Titan sprayers, including the MultiFinish 440, Impact 440/640, and RentSpray 600 Impact.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan pump block that serves as the central fluid manifold and structural housing for the pump's internal components. |
| Function | Houses the piston rod, upper and lower packings, valves, and seals. Directs fluid flow through the system and provides the structural foundation necessary for maintaining system pressure and integrity. |
| Specification | Precision-machined casting. Contains piston bores, valve ports, and internal fluid passages. Exact dimensions not independently established; verify against the illustrated parts list for your specific model revision. |
| Industrial Applications | Professional sprayer repair, complete pump rebuilds, fluid section servicing, and rental fleet equipment restoration. |
| Compatible Titan Machines | MultiFinish 440; Impact 440, 540, 640; RentSpray 500, RentSpray 600 Impact. Always verify against the parts diagram for your exact model and revision. |
| OEM Part Number | 805-324A Pump Block. |
| Compatible Parts & Assemblies | Piston rod, upper/lower packings, retainer nut, piston guide, foot valve assembly, outlet valve assembly. |
| Related Components | Seal/repacking kits (704-586 for MultiFinish 440), piston rod, foot valve assembly, outlet valve assembly, and mounting screws. These are separately identified components and are not included with the pump block. |
| Common Problems Solved | Cracked or warped pump housing, worn internal bores causing seal failure, damaged threads, corrosion, fluid leaks, and pressure loss. |
| Target Users / Markets | Painting contractors, rental fleets, maintenance crews, and repair shops servicing compatible Titan airless sprayers. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fitment in compatible sprayer pump systems. |
| Commercial Benefits | Restores fluid system integrity, enables complete pump rebuilds, prevents pressure loss, and extends pump service life. |
Complete the manufacturer pressure-relief procedure and disconnect power before servicing. The MultiFinish 440 manual describes removing the two pump block mounting screws with a 3/8-inch hex wrench, sliding the block down approximately 1/2 inch, and disconnecting the piston rod from the T-slot on the slider assembly. When rebuilding, always combine with a complete seal and wear kit (704-586 for MultiFinish 440) for optimal results. Inspect the block for cracks, scoring, or thread damage and replace if internal bores are worn beyond specification.
Frequently Asked Questions
Quick contractor-focused answers for confirming fitment, function, and service value.
No reviews yet. Be the first to review this product!