Titan 800-353A Upper Packing Assembly
Restore dependable fluid-section sealing with the Titan 800-353A Upper Packing Assembly. Designed for designated Titan Impact airless sprayers, this replacement packing assembly helps seal around the reciprocating piston rod, reducing fluid bypass caused by worn upper packings and supporting consistent pump performance during professional spraying operations.
Compatible Models: Titan Impact 1040, 1140, 1140I, and 1140IA, subject to fluid-section verification.
Related Components: Titan 805-545 Seal Retainer, 805-544 Ring Seal Spacer, and 805-450 Upper Housing.
Titan 800-353A Upper Packing Assembly – Restore Reliable Pump Sealing
Maintain efficient fluid-section operation with the Titan 800-353A Upper Packing Assembly. This replacement assembly forms part of the upper sealing system in compatible Titan Impact airless sprayers. It helps control coating-material leakage around the moving piston rod, supporting proper pump operation and effective sealing when installed with serviceable mating components.
How Does Titan 800-353A Upper Packing Assembly Work?
The upper packing assembly forms a seal around the reciprocating piston rod in the sprayer's fluid section. As the piston moves through repeated pumping cycles, the packing helps control fluid leakage along the rod.
In the manufacturer parts arrangement, the upper packing assembly is positioned near seal retainer 805-545, ring seal spacer 805-544, and upper housing 805-450. These components work together to maintain the intended upper sealing configuration.
Effective sealing also depends on correct installation, proper packing orientation, the condition of the piston rod, and the serviceability of the surrounding fluid-section components.
Common Signs of Worn Upper Pump Packings
Coating material may leak around the upper fluid-section or piston-rod sealing area.
Worn or damaged packing surfaces can reduce sealing effectiveness.
Persistent leakage may indicate packing wear or damage to the piston rod and mating surfaces.
Sealing problems may contribute to inefficient operation, although other pump faults can produce similar symptoms.
These symptoms are diagnostic indicators, not proof that the upper packing assembly alone is defective. Inspect the complete fluid section before replacing components.
Installation & Upper Packing Replacement Guidance
1. Relieve pressure. Follow Titan's complete pressure-relief procedure and disconnect electrical power.
2. Verify compatibility. Confirm that the fluid-section diagram identifies upper packing assembly 800-353A.
3. Inspect the piston rod. Check for scoring, corrosion, and other damage that may cause premature packing wear.
4. Inspect adjacent components. Examine the seal retainer, spacer, upper housing, and related sealing surfaces.
5. Install the replacement packing. Follow the manufacturer-specified orientation, lubrication, and assembly procedure.
6. Reassemble and test. Verify proper sealing and normal pump operation before returning the sprayer to service.
Related Titan Parts Commonly Serviced Together
Order Titan 800-353A Upper Packing Assembly
Maintain the upper fluid-section sealing system of your compatible Titan Impact sprayer with the correct replacement packing assembly from AllTitanParts. Verify the manufacturer's parts diagram, inspect the piston rod and associated sealing components, and choose the individual upper packing assembly or the complete repacking kit according to your repair requirements.
Frequently Asked Questions
Answers about Titan 800-353A compatibility, sealing function, and pump repair.
What is Titan 800-353A Upper Packing Assembly?
It is a replacement upper packing assembly used to help seal around the moving piston rod in compatible Titan Impact fluid sections.
Which Titan sprayers use part 800-353A?
The Impact 1040, Impact 1140, Impact 1140I, and Impact 1140IA are identified in the relevant fluid-section parts information. Verify the exact pump configuration before ordering.
What does the upper packing assembly do?
It helps control fluid leakage around the reciprocating piston rod in the upper portion of the fluid section.
Is Titan 800-353A included in repacking kit 0558740?
Yes. Titan's fluid-section parts information identifies upper packing assembly 800-353A among the components of repacking kit 0558740.
Does this assembly include the seal retainer and spacer?
The manufacturer lists seal retainer 805-545 and spacer 805-544 separately. They should not be assumed included with upper packing assembly 800-353A.
Can worn upper packings cause fluid leakage?
Yes. Worn upper packings can allow coating material to leak around the piston rod. Other damaged sealing or pump components can also contribute to leakage.
Should I replace the piston rod when replacing the upper packing?
Not automatically. Inspect the piston rod for scoring, corrosion, and excessive wear. Replace it if its condition prevents reliable sealing with the new packing assembly.
No reviews yet. Be the first to review this product!