Titan 800-101 Transducer Assembly
OEM Titan Electrical Component
Titan 800-101 Transducer Assembly is a genuine OEM electronic pressure sensor that monitors fluid pressure and converts it into an electrical signal for the control board on Titan 740i and 740IX airless sprayers, ensuring accurate pressure display and consistent spray performance.
Compatibility Overview
Replace if pressure readings are erratic, inaccurate, or display zero. A failed transducer can also cause the sprayer to build excessive pressure or fail to power on.
Titan Electrical Component Replacement
Titan 800-101 Transducer Assembly for 740i and 740IX Pressure Monitoring
Titan 800-101 is a genuine OEM transducer assembly engineered for the pressure monitoring system of compatible Titan airless sprayers. This electronic component mounts in the fluid path and continuously measures system pressure, converting mechanical pressure into an electrical signal sent to the control board. The control board uses this signal to display accurate pressure readings and regulate motor operation for consistent spray output. Official Titan service documentation for the 740IX provides a detailed replacement procedure, confirming the transducer threads into the pump block and must be properly aligned during reassembly to avoid damaging the transducer gasket. A failing transducer can cause erratic pressure display, inaccurate readings, or complete loss of pressure monitoring, leading to inconsistent spray patterns and difficulty adjusting pressure.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine Titan OEM transducer assembly for the 740i and 740IX airless sprayers. Mounts in the fluid path to monitor system pressure and send signals to the control board. |
| Function | Continuously measures fluid pressure, converts it to an electrical signal for the control board, and enables precise pressure readout on the user interface. Also plays a role in preventing the sprayer from building excessive pressure. |
| Compatible Titan Models | Titan 740 i Airless Sprayer; Titan 740 IX Airless Sprayer. |
| OEM Part Number | 800-101 Transducer Assembly. |
| Replacement Indicators | Erratic or fluctuating pressure readings; inaccurate pressure display versus actual output; no pressure reading (display shows zero); sprayer builds excessive pressure; power on but unit will not turn on. |
| Related Parts Commonly Serviced Together | Control board, wiring harness, pressure gauge (for comparison testing). |
| Common Problems Solved | Restores accurate pressure monitoring, eliminates erratic or incorrect pressure display, ensures proper motor regulation, and prevents over-pressurization. |
| Why Genuine OEM | Exact signal output specifications and thread dimensions ensure proper fit and reliable pressure monitoring. A low quality or incorrect transducer may send inaccurate signals, causing poor spray performance or failure to regulate pressure correctly. |
Before servicing the transducer, always perform the Pressure Relief Procedure and unplug the sprayer. The official Titan procedure requires removing the front cover, tilting the pump back, and removing the pump block to access the transducer. Carefully unplug the transducer wire from the jumper before removing the transducer from the pump block. During reassembly, ensure the transducer is properly aligned with the hole in the pump block to avoid damaging the transducer gasket.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!
