SprayTech part 800-036 is a replacement grommet designed to provide cushioning and sealing between components on compatible sprayers. This rubber grommet helps absorb vibration, prevent metal-to-metal contact, and protect wires or hoses that pass through openings. Installing a new grommet restores proper fitment and helps extend the service life of surrounding components.
| Part Number | 800-036 |
|---|---|
| Part Description | Grommet |
| Brand | SprayTech |
| Fits | Elite 5500; Elite 3500; Elite 3500 72v; Advantage 1100; Advantage 700; 0537810I_GB_D_F (1); 1140 IX; 1140 ix Airless Sprayer; 1140 i; 840i Airless Sprayer; 840 ix Airless Sprayer; 840 IX; 840 i Airless Sprayer |
| Condition | New |
The SprayTech 800-036 grommet is a replacement rubber component manufactured to original equipment specifications for use with a wide range of Elite, Advantage, and 800-series sprayers. This small but essential part serves multiple protective functions within the sprayer assembly. Grommets are installed in openings where wires, hoses, or other components pass through panels or brackets, providing a cushioned interface that prevents chafing and abrasion. Without a properly seated grommet, vibration from normal operation can cause wires to rub against sharp metal edges, leading to insulation damage, short circuits, or intermittent electrical failures. Similarly, grommets used between mounting surfaces help isolate vibration, reducing stress on fasteners and adjacent components. Over time, rubber grommets can dry out, crack, or become brittle due to age, chemical exposure, or temperature fluctuations. A deteriorated grommet may fall out of position, leaving wires unprotected or allowing unwanted movement between parts. Replacing a worn or missing grommet restores the intended protective barrier and helps prevent premature failure of wires, hoses, and mounted components. This grommet is formed to match original dimensions, ensuring proper fitment within the designated mounting location.
| Wire and hose protection | Prevents chafing against sharp edges and openings |
|---|---|
| Vibration isolation | Reduces transmission of vibration between components |
| Sealing function | Helps limit ingress of debris and moisture through openings |
| Cracking or brittleness | Rubber shows signs of drying, cracking, or hardening |
|---|---|
| Displacement or loss | Grommet has fallen out of position or is missing entirely |
| Wire insulation damage | Visible wear on wires passing through the opening |
| Loose fitment | Grommet no longer seats securely in its mounting hole |
SprayTech part 800-036 is compatible with the following sprayers. Confirm fitment using the parts diagram for your specific model.
| Model | Component |
|---|---|
| Elite 5500 | Grommet |
| Elite 3500 | Grommet |
| Elite 3500 72v | Grommet |
| Advantage 1100 | Grommet |
| Advantage 700 | Grommet |
| 0537810I_GB_D_F (1) | Grommet |
| 1140 IX | Grommet |
| 1140 ix Airless Sprayer | Grommet |
| 1140 i | Grommet |
| 840i Airless Sprayer | Grommet |
| 840 ix Airless Sprayer | Grommet |
| 840 IX | Grommet |
| 840 i Airless Sprayer | Grommet |
When replacing a grommet, these related components are often inspected or serviced at the same time.
Inspect wiring passing through the grommet for signs of abrasion, cuts, or insulation damage.
Hoses passing through panels should be checked for wear points where contact may occur.
Inspect the metal surface around the grommet opening for burrs or sharp edges.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
