Titan 738-021 O-ring, Synthetic Rubber
OEM Titan Sealing Component
Titan 738-021 O-Ring is an OEM synthetic rubber seal engineered to provide leak-proof sealing in fluid and air systems on compatible PowrTex, PowrCoat, Commander, and Admiral spray systems, preventing material leakage and maintaining system pressure for reliable equipment operation.
Compatibility Overview
Replacement O-ring restores leak-free sealing, prevents fluid and air loss, maintains system pressure, and ensures consistent spray performance. For related components, see the Titan Air Powered Airless Sprayer Parts collection.
Titan Sealing Component Replacement
Titan 738-021 O-Ring for PowrTex, PowrCoat, Commander, and Admiral Systems
Titan 738-021 is an OEM synthetic rubber O-ring engineered to provide leak-proof sealing in fluid and air systems on compatible PowrTex 15:1, PowrCoat, Commander, and Admiral spray systems. This precision elastomer creates leak-tight barriers between mating parts such as pump housings, fluid manifolds, valve assemblies, and air system connections. O-rings degrade over time due to chemical exposure, compression set, thermal cycling, and physical damage. A worn, hardened, or damaged O-ring will allow fluid or air to leak past the seal, causing pressure loss, erratic operation, and material waste.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan synthetic rubber O-ring engineered for use across PowrTex 15:1, PowrCoat 730/745/940/960/975, Commander 742-555/742-557, and Admiral 850-555/850-557 spray systems. Provides critical sealing in both fluid and air systems. |
| Function | Creates a leak-tight seal between mating components such as pump housings, fluid manifolds, valve assemblies, and air system connections. Manufactured from specially formulated synthetic rubber compounds offering excellent resistance to a wide range of paints, solvents, and coatings. Maintains flexibility and sealing properties under continuous pressure cycling, vibration, and temperature variations. |
| Compatible Systems | PowrTex 15:1; PowrCoat 730, 745, 940, 960, 975; Commander 742-555/742-557; Admiral 850-555/850-557. Verify fit using the correct parts diagram for your exact model and serial number. |
| Industrial Applications | Professional sprayer repair, fluid system maintenance, air system servicing, and preventive maintenance of PowrTex, PowrCoat, Commander, and Admiral spray systems used by painting contractors, industrial finishers, and professional coating applicators. |
| Related Parts Commonly Serviced Together | Other O-rings in the assembly, seals, gaskets, and mating components such as pump housings, manifolds, and air valves. Inspect these components when replacing O-rings. |
| Common Problems Solved | External leaks at connections, difficulty maintaining system pressure, air ingestion into the fluid system, erratic operation, and material waste caused by worn, hardened, or damaged seals. |
| Signs Replacement Is Needed | Visible fluid or air leakage at the sealed joint, difficulty maintaining pressure, air bubbles in the fluid stream, and visible damage such as flattening, cracking, hardening, or nicks. |
| Installation & Maintenance | Ensure the sealing groove is clean and free of debris. Lubricate the new O-ring with an appropriate grease or light oil to prevent rolling and pinching during installation. Do not stretch the O-ring excessively. Inspect mating surfaces for damage. Replace O-rings whenever components are disassembled for service. |
| Commercial Benefits | Restores leak-free sealing, prevents fluid and air loss, maintains system pressure, ensures consistent spray performance, and extends equipment service life. |
The 738-021 O-Ring is a critical wear item in the fluid and air systems of PowrTex, PowrCoat, Commander, and Admiral sprayers. O-rings degrade over time due to chemical exposure, compression set, thermal cycling, and physical damage. A worn, hardened, or damaged O-ring will allow fluid or air to leak past the seal, causing pressure loss, erratic operation, material waste, and potential component damage. Symptoms include external leaks at connections, difficulty maintaining pressure, and air ingestion into the fluid system. When replacing O-rings, ensure the sealing groove is clean and free of debris. Lubricate the new O-ring with an appropriate grease or light oil to prevent rolling and pinching during installation. Do not stretch the O-ring excessively. Inspect mating surfaces for damage. Replace O-rings whenever components are disassembled for service. Note that availability of this part may be limited through some retailers, so verify stock before ordering. Use genuine Titan components to ensure proper fit, correct material specifications, and reliable long-term operation. For related Titan air-powered sprayer components, see the Titan Air Powered Airless Sprayer Parts and Air Powered Airless Sprayer Parts collection.
Frequently Asked Questions
Quick contractor-focused answers for confirming fitment, function, and service value.
No reviews yet. Be the first to review this product!