Titan 710-191 Inlet Screen
OEM Titan Filtration Component
Titan 710-191 Inlet Screen (30 Mesh) is a genuine OEM stainless steel filter that installs at the fluid inlet to capture sand, debris, and dried paint skins before they enter the pump on compatible Titan airless sprayers. Superseded by 710-191A.
Compatibility
Inspect and clean before each use. Replace if clogged, torn, or damaged. Never operate the sprayer without the inlet screen in place.
Titan Filtration Component Replacement
Titan 710-191 Inlet Screen for Impact & Elite Sprayer Service
Titan 710-191 is a 30-mesh stainless steel inlet screen that serves as the first line of defense for your sprayer's pump. It captures sand, debris, and dried paint skins before they enter the fluid section, protecting internal valves, packings, and cylinders from costly damage. This part is superseded by 710-191A.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine Titan 30-mesh inlet screen for airless sprayers, installed at the fluid inlet. Superseded by 710-191A. |
| Function | Filters out sand, dirt, dried paint skins, and fibers before they enter the pump, protecting internal components from abrasive wear and damage. |
| Specifications | 30 mesh (fine filtration, approx. 600 microns); stainless steel; 0.07 lb (34 g); 2.25 x 2.3 x 2.35 in; made in USA. |
| Compatible Titan Machines | Titan Impact 1140 (primary fit, confirmed in manual); Titan Impact X 540I; Titan Impact 840; Titan Elite 3500; Titan Impact 640. Also compatible with the Epic 690HPG, 660HPX, 660EX, 447HPX; Airless Sprayer 690GXC, 660XC, 550XC; Impact X 440, X 410, 1140 I/IA, 1040, 740, 640 I/IA, 840 I/IA; Elite 3500 72v. Always confirm fitment using your exact model's parts diagram and serial number. |
| OEM Part Number | 710-191 Inlet Screen. Current replacement: 710-191A. |
| Replacement Indicators | Clogged screen with visible debris buildup; torn or damaged mesh; missing screen; repeated tip clogs despite cleaning; reduced fluid flow or pump cavitation. |
| Related Parts Commonly Serviced Together | Inlet fitting/elbow (inspect for cracks); suction hose and strainer; pump packings and seals (inspect if debris bypassed a damaged screen). |
| Why Genuine OEM | Exact mesh size and stainless steel construction ensure proper filtration and durability. A clogged or missing screen allows debris to damage internal pump components, leading to costly repairs. |
Service guidance: Inspect the inlet screen before each use. Clean by soaking in solvent and blowing out with compressed air. Replace if torn, corroded, or cannot be fully cleaned. Never operate the sprayer without the inlet screen in place, as unfiltered material will quickly damage internal components. Titan troubleshooting guides confirm that a clogged inlet screen is a common cause of priming failure and pressure loss.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!