Part 704-304 is a pail bracket used to securely mount a standard paint pail to the sprayer frame. It provides a stable and convenient holder for material supply during operation. This bracket restores or adds the functionality of using pail-fed material with compatible sprayers.
| Part Number | 704-304 |
|---|---|
| Part Description | Pail Bracket |
| Fits | 440 IX Airless Sprayer; 540 IX Airless Sprayer; 640 i Airless Sprayer; 640 IX Airless Sprayer; 740 i Airless Sprayer; 740 IX; 740 ix Airless Sprayer; Impact 440 service |
| Condition | New |
The 704-304 pail bracket is a mounting accessory that clamps or bolts onto the sprayer's frame, designed to hold a standard 5-gallon (or similar size) paint pail. It positions the material source at a convenient height and location, allowing the pump to draw directly from the pail for efficient operation.
A missing, bent, or broken bracket forces the operator to place the pail on the ground, which can lead to inefficient suction, increased strain on the pump inlet, and a less organized work area. Replacing the bracket provides a secure, elevated mounting point for the material container.
| Pail Support | Securely holds a standard paint pail in place on the sprayer frame |
|---|---|
| Convenience & Safety | Elevates the material source for better pump priming and reduces tripping hazards |
| System Integration | Provides a fixed point to connect the pump suction hose to the pail |
| Missing Bracket | The accessory was never installed or has been lost |
|---|---|
| Physical Damage | Bracket is bent, cracked, or has broken mounting tabs or hardware |
| Poor Fit / Security | Bracket no longer holds the pail securely, allowing it to wobble or fall |
| Upgrade / Addition | Adding pail-fed capability to a sprayer that will support it |
Part 704-304 is designed to fit the frame geometry and mounting points of the following airless sprayer models. Its design accommodates the specific dimensions and layout of these units.
| Sprayer Model | Component |
|---|---|
| 440 IX Airless Sprayer | Pail Bracket |
| 540 IX Airless Sprayer | Pail Bracket |
| 640 i Airless Sprayer | Pail Bracket |
| 640 IX Airless Sprayer | Pail Bracket |
| 740 i Airless Sprayer | Pail Bracket |
| 740 IX Airless Sprayer | Pail Bracket |
| 740 ix Airless Sprayer | Pail Bracket |
| Impact 440 service | Pail Bracket |
When setting up or repairing a pail-fed system, these components are often used or inspected in conjunction with the pail bracket.
The hose and rigid tube that draws material from the pail into the pump.
Bolts, nuts, and washers required to attach the bracket to the sprayer frame.
A fitting that seals the pail lid around the suction tube to prevent contamination and spillage.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
