702-130 is a repacking kit designed to rebuild the fluid section on Epic 447ex, 660ex, and 690GX sprayers. This comprehensive kit includes all necessary packings, seals, and O‑rings to restore pump performance, eliminate leaks, and maintain consistent pressure. Replace worn or failed packings with this genuine kit to extend pump life and ensure reliable operation.
| Part Number | 702-130 |
|---|---|
| Part Description | Repacking Kit |
| Brand | Epic |
| Fits | Epic 447ex, 660ex, 690GX |
| Condition | New |
The 702-130 repacking kit is an OEM rebuild kit designed for the fluid section of Epic 447ex, 660ex, and 690GX sprayers. It contains all the wear items necessary to restore pump performance: piston packings, intake and discharge valve seals, O‑rings, and backup rings. This kit allows you to rebuild the existing pump rather than replacing the entire fluid section [citation:1].
Over time, packings and seals wear out from abrasion, chemical exposure, and normal use. Symptoms include loss of pressure, external leaks, poor priming, or erratic spray patterns. Rebuilding the pump with this genuine kit restores like‑new performance, extends pump life, and is a cost‑effective alternative to complete fluid section replacement. This kit may also be compatible with Titan, Wagner, and Speeflo models requiring similar service parts [citation:1].
| Seal replacement | Renews piston packings and valve seals |
|---|---|
| Leak elimination | Stops external and internal fluid leaks |
| Pressure restoration | Restores ability to reach and hold pressure |
| Low / surging pressure | Unable to maintain consistent output |
|---|---|
| External leaks | Paint seeping from pump throat or valve areas |
| Poor priming | Pump fails to draw material or loses prime |
| Preventive maintenance | Rebuild after extended use to avoid failure |
Part 702-130 is designed for use on the following Epic models. It may also be compatible with similar Titan, Wagner, and Speeflo pumps using equivalent service parts [citation:1].
| Model | Component |
|---|---|
| Epic 447ex | Repacking kit |
| Epic 660ex | Repacking kit |
| Epic 690GX | Repacking kit |
| Titan / Wagner / Speeflo (cross-reference) | Equivalent service kit [citation:1] |
When rebuilding the pump, inspect these associated components to ensure complete system reliability.
Inspect for scoring or wear; replace if damaged.
Check valve seats and balls for wear; replace if pitted.
These may be included in the kit; ensure proper installation.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
