Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 700-742 Tie Wrap

Titan 700-742 Tie Wrap

Sourced From:
Titan Tools Inc.

Part number 700-742 is a tie wrap. This is a nylon cable tie used for securing, bundling, and organizing hoses, cables, and wiring on compatible sprayer equipment. It is compatible with the following models: 840 i Airless Sprayer; 840 IX ; 840 ix Airless Sprayer; 840i Airless Sprayer; 1140 i; 1140 ix Airless Sprayer; 1140 IX; Advantage 700. The tie wrap provides a simple, reliable method for managing lines to prevent tangles, abrasion, and snags during operation.

Part Number 700-742
Part Description Tie Wrap
Condition New

$4.3

Tie Wrap for Airless Sprayer Maintenance

Part number 700-742 is a standard nylon tie wrap. This versatile fastener is used throughout compatible sprayer models to secure fluid hoses, electrical wires, and control cables to the machine frame or to each other. Proper routing and securing of lines is essential for safe and reliable operation.

This tie wrap is compatible with a wide range of models including the 840 i Airless Sprayer, 840 IX, 840 ix Airless Sprayer, 840i Airless Sprayer, 1140 i, 1140 ix Airless Sprayer, 1140 IX, and the Advantage 700. Missing or broken tie wraps can lead to loose lines that may snag, chafe, or become damaged, potentially causing leaks or electrical faults.

Service Guidance: When replacing tie wraps, always cut and remove old ones carefully to avoid scratching lines. Do not over-tighten, as this can deform hoses or pinch wires. Route lines neatly away from moving parts and heat sources.

Function and usage guidelines

Primary function
Securing Lines Holds hoses, cables, and wires firmly in place along the sprayer frame.
Organization Bundles multiple lines together for a clean, professional appearance and easier service access.
Strain Relief Prevents excessive movement that could loosen connectors or cause fatigue.
Abrasion Prevention Keeps lines from rubbing against each other or sharp edges.
When to use a new tie wrap
During Repairs Whenever a hose or wire is disconnected and re-routed.
Broken/Missing When an existing tie wrap is cracked, brittle, or absent.
Preventive Maintenance As part of routine inspection to replace weathered ties.
Adding Accessories To secure new lines or components added to the sprayer.

Compatibility

Tie wrap part 700-742 is a general service part used across the following airless sprayer models for securing various lines and components.

Compatible Sprayer Models
840 i Airless Sprayer
840 IX
840 ix Airless Sprayer
840i Airless Sprayer
1140 i
1140 ix Airless Sprayer
1140 IX
Advantage 700

Related parts commonly serviced together

Tie wraps are often used in conjunction with other routing and protection hardware.

Hose Clamps

Used for sealing hoses to fittings, while tie wraps secure the hose body.

Grommets

Protect lines where they pass through panels; tie wraps secure lines near the grommet.

Spiral Wrap / Loom

Sleeving used to bundle and protect lines; often secured at ends with tie wraps.

Frequently Asked Questions

It is a standard nylon tie wrap, also commonly called a cable tie or zip tie. It is used to secure and organize hoses, wires, and cables on compatible sprayer models.

This tie wrap is used on the 840 i, 840 IX, 840 ix, 840i, 1140 i, 1140 ix, 1140 IX, and Advantage 700 airless sprayer models for various securing applications.

While a generic tie wrap of similar size and strength may function, using the specified part (700-742) ensures compatibility with the original design's length, width, tensile strength, and UV resistance. For optimal reliability and to meet factory specifications, using the correct part is recommended.

To install: Thread the pointed end through the head, loop it around the items to be secured, pull tight until snug (do not over-tighten), and trim the excess tail. To remove safely: Use side-cutters or a cable tie removal tool to cut the head at the locking pawl. Avoid cutting the tail flush, as the sharp edge can scratch. Never reuse a tie wrap that has been tightened and released.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods