Titan part 700-203 is a High-Performance Pump Grease specifically formulated for airless paint sprayer pumps. This specialty lubricant reduces friction, protects against wear, and helps seal the pump packings in the high-pressure fluid section. Using the correct factory-specified grease is essential for the longevity, reliability, and proper break-in of your sprayer's pump.
| Part Number | 700-203 |
|---|---|
| Part Description | Pump Grease (Tube / Cartridge) |
| Compatible With | Helix FR, Helix VR Series & other Titan pumps |
| Primary Use | Fluid Section Lubrication & Packing Break-in |
| Condition | New, Genuine Titan Lubricant |
Titan 700-203 is the factory-approved high-pressure pump grease for lubricating the fluid section of professional airless sprayers. This is not a standard automotive or bearing grease; it is specifically engineered to withstand the unique environment inside a paint pump, where it is in constant contact with the reciprocating plunger, packings, and potential paint or solvent seepage.
Using the correct grease, such as 700-203, is a critical maintenance step. It dramatically reduces friction and heat during the break-in of new packings, extends the life of all moving parts in the fluid section, and helps form a secondary seal to minimize leakage. Incorrect lubrication is a common cause of premature packing failure, excessive wear, and pump seizure.
| Packing Break-in & Lubrication | Coats the plunger and saturates new packings to prevent dry-start friction and burning during initial operation. |
|---|---|
| Wear Protection | Forms a protective film on the plunger and cylinder wall, reducing metal-on-metal and metal-on-packing wear. |
| Seal Enhancement | Helps fill micro-gaps in the packing stack, aiding in pressure sealing and reducing fluid seepage. |
| Material Compatibility | Formulated to resist breakdown when in contact with water-based and solvent-based paints that may seep past packings. |
| Packing Replacement | Essential during the installation of any new pump packings or seal kit. |
|---|---|
| Routine Maintenance | Applied periodically through the grease fitting (zerk) on the pump manifold as specified in the manual. |
| Pump Reassembly | Any time the fluid section is disassembled for cleaning or service. |
| Dry Pump Operation | If the pump has been run dry or sounds like it's "grinding," immediate lubrication is needed. |
Titan 700-203 Grease is the standard, manufacturer-recommended lubricant for a wide range of Titan professional sprayers, including the models listed below. It is the correct grease for their high-pressure piston pumps.
| Compatible Sprayer Series | Application |
|---|---|
| Helix FR Series | Primary pump grease for fluid section lubrication and packing maintenance. |
| Helix VR Series | Primary pump grease for fluid section lubrication and packing maintenance. |
| Most Titan Piston Pumps | Widely specified for Impact, Power-Flo, and other series with similar pump designs. (Always consult manual). |
Universal Use: While compatible with Helix FR/VR, 700-203 is the standard grease for most Titan airless sprayer pumps. It is a critical consumable for any service shop or professional painter.
Grease application is part of a standard maintenance procedure. These items are commonly used or inspected alongside it.
A new packing kit must be lubricated with 700-203 grease during installation.
A standard grease gun is needed to apply grease through the pump's zerk fitting for routine maintenance.
Inspect and clean this fitting before adding grease to ensure it is not clogged.
The pump should be flushed of old material before applying new grease during a service.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
