Titan 697-217 TR1 217 Line Striping Tip
TITAN TR1 REVERSIBLE LINE STRIPING TIP
Titan 697-217 TR1 217 Line Striping Tip is a professional reversible airless tip with a 2-inch nominal line width and .017-inch orifice. Titan specifies this configuration for stencil and athletic-court applications using alkyd coatings where a heavy film is required.
The 697-217 is a specialized narrow-pattern TR1 selection. Titan's striping-tip chart places it under Stencils & Athletic Courts and specifies “Alkyd only, heavy film,” making correct coating selection important before use.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 697-217 is a TR1 reversible airless line-striping tip. Titan's official TR1 chart specifies a 2-inch / 51 mm nominal line width and .017-inch / .43 mm orifice. It is categorized for stencil and athletic-court applications and identified specifically for heavy-film application with alkyd coatings. |
| Function | The tip meters coating through its .017-inch precision orifice and forms a narrow 2-inch nominal spray pattern for controlled marking work. Its reversible configuration allows the operator to rotate the tip into the reverse position to help clear certain obstructions, then return it to the spraying position. |
| Industrial Applications | Titan categorizes 697-217 under Stencils & Athletic Courts. Its narrow pattern is suited to compatible professional marking applications requiring a 2-inch nominal stripe and comparatively heavy film from an alkyd coating, including detailed stencil work and athletic-court layouts. |
| Accurate Compatible Titan Machines | Titan publishes 697-217 in TR1 tip charts supplied with PowrLiner equipment, including PowrLiner 550, PowrLiner 2850 and PowrLiner 3500 documentation. Because tip capacity differs among machines and multi-gun configurations, use only with a Titan PowrLiner whose specified maximum tip capacity supports a .017-inch orifice. |
| Accurate Part Number | Titan 697-217 — TR1 217 reversible line-striping tip. Verified Titan specifications are 2-inch / 51 mm nominal width, .017-inch / .43 mm orifice, alkyd-only coating classification and heavy-film application. |
| Compatible Parts & Assemblies | Use with a compatible Titan airless line-striping spray gun, reversible-tip guard, tip seal, filtration system and high-pressure hose arrangement. The complete gun and pump configuration must support the .017-inch orifice and the specific alkyd marking coating being sprayed. |
| Related Parts Commonly Serviced Together | When replacing the TR1 tip, inspect the compatible tip guard and seal, spray-gun filter, gun fluid passages, high-pressure hose connections and machine filtration. Restricted filtration, worn seals or deteriorated gun components can affect material delivery and spray-pattern quality. |
| Common Problems Solved | A fresh 697-217 can restore the intended narrow fan pattern when normal abrasive wear causes an existing tip to lose definition or deliver excessive material. The reversible design also provides a practical way to clear certain tip blockages without immediately removing the tip from the spray gun. |
| Use with Coating Systems | Titan specifically lists the 697-217 as “Alkyd only, heavy film” within the Stencils & Athletic Courts section of its TR1 striping-tip chart. Do not treat it as a general-purpose recommendation for every traffic paint. Confirm coating viscosity, required tip size, filtration and sprayer capacity before application. |
| OEM & Brand Information | 697-217 is a genuine Titan Tool TR1 line-striping tip documented in Titan PowrLiner operating literature. The TR1 range provides multiple line-width and orifice combinations so professional marking contractors can select a tip according to coating type, required film build and desired stripe width. |
| Commercial Benefits | The 217 configuration combines a narrow 2-inch pattern with a .017-inch opening for specialized heavy-film alkyd marking. Contractors can use it for jobs where the wider 417 or 617 tips would produce an unnecessarily broad stripe, while retaining the service convenience of Titan's reversible TR1 design. |
Contractor Selection Insight
Choose Titan 697-217 when you specifically need a 2-inch nominal pattern, .017-inch orifice and heavy-film application with an alkyd marking coating. Titan places this tip in its Stencils & Athletic Courts group rather than the “Most Traffic Paints” group. For the same .017-inch orifice with wider patterns, Titan lists 697-417 at 4 inches and 697-617 at 6 inches, but their documented film classifications differ.
FAQ Section
Key answers for contractors selecting Titan 697-217 TR1.
No reviews yet. Be the first to review this product!