Titan 694-2108621 TR2 Tip
TITAN TR2 DUAL-PATTERN LINE STRIPING TIP
Titan 694-2108621 TR2 LS 2108/621 Tip combines a 421 striping pattern and 621 stenciling pattern in one professional airless tip. Its .021-inch orifice class lets pavement-marking contractors switch between narrow striping and wider stencil work with a simple twist.
Titan identifies this TR2 configuration with a yellow flag and white filter designation. Two sintered tungsten-carbide tip cores provide rapid pattern changes for professional pavement striping and stencil applications without repeatedly replacing separate spray tips.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 694-2108621 is the TR2 LS 2108/621 dual-pattern airless tip for professional pavement striping and stenciling. Titan pairs a 421 striping tip with a 621 stencil tip in one assembly, providing two fan patterns without requiring contractors to carry out a conventional tip change between applications. |
| Function | TR2 technology combines two tip cores in one assembly. Twisting the tip changes between the narrower 421 striping fan and wider 621 stencil fan. Both designations use a .021-inch orifice, allowing the operator to change application width while retaining the same nominal fluid-opening size. |
| Industrial Applications | Designed for professional parking-lot, pavement and field-marking operations that require both line striping and stencil work. The dual-pattern arrangement is useful when crews move between standard traffic lines and wider-pattern stencil applications during parking layouts, directional markings, accessibility markings and similar pavement-marking projects. |
| Accurate Compatible Titan Machines | 694-2108621 is an airless line-striping accessory rather than a machine-specific replacement component. Titan documents TR2 line-striping tips within its professional field-and-pavement marking system. Use it with a compatible airless striper and gun/guard arrangement capable of supporting a .021-inch tip with the selected coating and operating conditions. |
| Accurate Part Number | Titan 694-2108621 — TR2 LS 2108/621. Titan's current accessory and field-marking documentation specifies 421 for striping, 621 for stenciling, a yellow flag and white filter designation. The 421 and 621 patterns both correspond to a .021-inch orifice. |
| Compatible Parts & Assemblies | Designed for installation in a compatible professional airless line-striping gun and tip-guard system. Titan's TR2 construction uses two sintered tungsten-carbide tip cores arranged together in one assembly. Compatible system components include the appropriate high-pressure spray gun, guard, seal, filtration and airless hose arrangement. |
| Related Parts Commonly Serviced Together | When servicing or replacing the TR2 tip, inspect the tip guard, tip seal, gun filter, gun fluid passages and high-pressure hose connections. Restricted filtration can reduce flow, while worn seals can allow leakage. Titan specifies a white filter designation for the 694-2108621 TR2 configuration. |
| Common Problems Solved | The dual-tip configuration reduces interruptions caused by repeatedly removing a striping tip and installing a separate stencil tip. It also gives contractors an efficient way to move between narrow and wide fan patterns. Replacing a worn TR2 tip can restore pattern definition and more consistent coating placement when normal tip wear begins affecting application quality. |
| Use with Coating Systems | Use with compatible airless pavement and line-marking coatings appropriate for a .021-inch orifice. Titan's TR1 reference chart associates a .021-inch orifice with approximately 0.47 GPM / 1.78 LPM flow. Actual operating requirements depend on coating viscosity, pressure, filtration and the output capacity of the selected striping machine. |
| OEM & Brand Information | 694-2108621 is a genuine Titan Tool TR2 line-striping accessory. Titan describes TR2 as a two-in-one tip system combining two sintered tungsten-carbide tip cores for quick changes between two fan patterns. The 2108/621 configuration is one of four documented TR2 line-striping/stenciling combinations. |
| Commercial Benefits | Contractors can perform both striping and stencil work with one tip assembly, reducing time spent changing tips during pavement-marking jobs. The 421/621 pairing offers a practical .021-inch flow class between Titan's smaller 419/519 combination and larger 423/623 combination, helping crews select output appropriate for their coating and production requirements. |
Contractor Selection Insight
Choose 694-2108621 when you need the .021-inch TR2 combination: 421 for striping and 621 for stenciling. It sits between Titan's .019-inch 419/519 and .023-inch 423/623 TR2 combinations, making tip selection easier when balancing material flow and production. Verify that your airless striper supports a .021-inch tip and that the coating manufacturer recommends this orifice range.
FAQ Section
Key answers for contractors selecting Titan 694-2108621 TR2.
No reviews yet. Be the first to review this product!
