Titan part 600-105 is a 1/8" Texture Nozzle, a key consumable component used with air-powered texture sprayers to apply materials like acoustic ceiling texture (popcorn), stucco, and other heavy-bodied coatings. This nozzle attaches to the end of the spray gun and is responsible for the final pattern and texture size of the material being sprayed. It is a standard, high-wear item for compatible sprayers.
| Part Number | 600-105 |
|---|---|
| Part Description | Texture Nozzle, 1/8" Orifice |
| Brand | Titan |
| Fits | PowrTex 300DD, 600DD, and compatible texture sprayers |
| Condition | New |
The Titan 600-105 is a genuine 1/8" texture nozzle used with professional drywall texture sprayers. This nozzle has a 1/8-inch (approximately 3.2mm) orifice, which is a common size for spraying heavier acoustic textures and stucco finishes. It threads onto the end of the texture spray gun and works in conjunction with air pressure to break up and propel the material onto the surface.
Texture nozzles are high-wear consumable parts. The orifice can become worn or enlarged from abrasive materials, or clogged with dried product, leading to an inconsistent spray pattern and poor finish quality. Replacing a worn nozzle with a new Titan 600-105 ensures the correct material flow, pattern size, and texture consistency for professional results.
| Orifice Size Control | The 1/8" hole determines the maximum size of material that can pass through, controlling the flow rate and final texture clump size. |
|---|---|
| Pattern Formation | Works with the gun's air cap to shape and distribute the spray pattern of material onto the ceiling or wall. |
| Wear Component | Designed as a replaceable part that absorbs the abrasion from the textured material, protecting the more expensive gun body. |
| Worn Orifice | The hole appears larger, oval-shaped, or has a noticeable "lip" from material erosion. |
|---|---|
| Clogging | The nozzle is frequently clogged and cannot be fully cleaned, or material dries permanently inside. |
| Poor Pattern | The spray pattern becomes uneven, streaky, or fails to produce the desired texture size and consistency. |
| Routine Maintenance | Replaced as a standard consumable after a certain number of bags of material sprayed or at the start of a new project. |
The 600-105 nozzle is a standard accessory and replacement part for Titan's line of drywall texture sprayers. It is confirmed to be used with the following models:
| Compatible Sprayer Series | Specific Models |
|---|---|
| PowrTex Series (Direct Drive) | PowrTex 300DD, PowrTex 600DD |
This nozzle is also compatible with other Titan texture sprayers that use the same standard thread pattern for their spray gun. It is a common size for many professional texture applications.
When servicing or replacing a texture nozzle, these related items are often needed for optimal performance.
The air cap surrounds the nozzle and controls the atomizing air pattern. It should be cleaned regularly.
A small rubber or fiber gasket ensures a tight seal between the nozzle and the gun body to prevent leaks.
A drop of air tool oil on the nozzle threads can prevent seizing and make future removal easier.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
