Titan part 580-023 is a Trigger Guard for compatible professional spray guns. This durable, molded component attaches to the gun's handle and encircles the trigger mechanism. Its primary safety function is to prevent the trigger from being accidentally depressed during transport, handling, or when the gun is set down, which could cause unintentional fluid discharge.
| Part Number | 580-023 |
|---|---|
| Part Description | Trigger Guard |
| Brand | Titan |
| Fits | Airless LX80 Platinum; HVLP Airspray ProFinish AS1130 |
| Condition | New, OEM |
The Titan 580-023 is a genuine OEM Trigger Guard, a critical safety component for professional spray guns. It is the external, often one-piece shield that bolts or clips onto the spray gun's handle assembly, physically blocking accidental contact with the trigger. This part is an essential feature for any high-pressure spray system to enhance worksite safety and prevent hazardous unintentional spraying.
A missing, broken, or cracked trigger guard compromises the fundamental safety of the spray gun. Without it, the trigger is exposed to being snagged on hoses, bumped against ladders or buckets, or accidentally pressed when setting the gun down. Replacing a damaged guard with the genuine Titan 580-023 restores this important protective barrier, helping to prevent material waste, cleanup, and potential injury from accidental discharge.
| Accidental Discharge Prevention | Creates a physical barrier that must be intentionally reached into in order to press the trigger. |
|---|---|
| Trigger Protection | Shields the trigger mechanism from impacts, debris, and damage during transport and storage. |
| Ergonomic Reference | Helps guide the user's finger to the correct position on the trigger for controlled operation. |
| Physical Damage | The guard is cracked, broken, or has missing pieces that expose the trigger. |
|---|---|
| Mounting Failure | The guard is loose, will not stay attached, or its mounting screws/threads are stripped. |
| Gun Rebuild | Replacing the guard as part of a comprehensive gun overhaul or handle assembly replacement. |
| Safety Upgrade | Installing a guard on a gun that previously lacked one (if the model design allows). |
The Titan 580-023 Trigger Guard is designed for spray guns within compatible series. Based on parts system commonality and gun platform sharing, it fits the following models:
| Compatible Spray Gun / System | Platform & Notes |
|---|---|
| Airless LX80 Platinum Spray Gun | This trigger guard is a component for the LX-80 series airless guns. The guard may be part of the main handle assembly (580-538). |
| HVLP Airspray ProFinish AS1130 | The ProFinish AS1130 system utilizes compatible spray guns and components. The 580-023 guard fits the spray gun used with this HVLP system. |
Many Titan spray gun components, including handles and guards, are shared across airless and HVLP platforms that use the same gun body design.
The trigger guard interfaces directly with other components on the gun handle. When replacing the guard, inspect these related parts.
For major handle damage, the entire assembly including the guard, handle body, and filter compartment may be sold as one unit.
The trigger itself is a separate, wear-prone part that fits inside the guard.
Long and short screws used to secure the trigger and potentially the guard to the gun handle.
Seals like the 560-038 Handle Seal ensure a tight fit between the handle and other gun components[citation:4].
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
