Please wait while we process your order...

TITAN 50504 O-Ring

$2.90
Available to Order
Part #: 50504

OEM SprayTECH Sealing Component

TITAN 50504 O-Ring is a genuine OEM sealing component used in the transducer assembly of compatible SprayTECH EP-series sprayers, preventing fluid bypass and maintaining consistent operating pressure.

Brand: SprayTECH / Titan Part #: 50504 Type: O-Ring Location: Transducer Assembly

Compatibility Table

Brand Compatible SprayTECH Machines Part Number Serviced With Technical / Commercial Detail
SprayTECH EP2300, EP2300se, EP2400, EP2510 50504 Transducer assembly, retainer ring, seals Item 2 in Transducer Assembly (Figure 22) of EP2300 manual.

A flattened, hardened, or cracked O-ring causes pressure loss, erratic spray patterns, and fluid leaks. Replacement restores sealing integrity and rated pump performance.

Quantity
Buy Now
Genuine OEM Part Fast Shipping Easy Returns

SprayTECH Transducer Assembly Sealing Component

TITAN 50504 O-Ring for EP-Series Sprayers

TITAN 50504 is the OEM O-ring specified for the transducer assembly of compatible SprayTECH EP-series sprayers. It creates a positive seal between mating surfaces in the fluid section or manifold, preventing fluid bypass and maintaining consistent operating pressure.

OEM: SprayTECH / Titan Part #: 50504 Type: O-Ring Location: Transducer Assembly
Detail Technical / Commercial Information
Product Overview Genuine OEM O-ring used in the transducer assembly of compatible SprayTECH EP-series piston pump sprayers.
Function Provides a leak-tight seal between mating surfaces in the fluid section or manifold. Prevents fluid bypass, maintains pressure, and eliminates external weeping from sealed joints.
Replacement Triggers Pressure loss or difficulty reaching stall pressure, visible fluid seepage around the sealed joint, compression set/cracks/hardness, or during any pump rebuild.
Industrial Applications Professional sprayer transducer assembly repair and restoration of proper sealing.
Compatible SprayTECH Machines EP2300, EP2300se, EP2400, and EP2510. Listed as item 2 in the Transducer Assembly (Figure 22) of the official EP2300 service manual.
OEM Part Number 50504 O-Ring.
Related Parts Commonly Serviced Together Retainer ring 50431, pump packings/seals, manifold components, and valve seats/balls. Inspect these during O-ring replacement.
Common Problems Solved Fluid leaks from the sealed joint, pressure loss under load, erratic spray performance, and difficulty priming caused by a compromised O-ring.
Target Users / Markets Painting contractors, maintenance crews, rental fleet operators, and repair shops servicing SprayTECH EP-series sprayers.
OEM and Brand Information Genuine SprayTECH replacement component documented in the official EP2300 service manual.
Commercial Benefits Low-cost OEM O-ring that restores sealing integrity, prevents fluid waste, and ensures the sprayer operates at rated pressure and flow.

The 50504 O-Ring is installed in the transducer assembly. If you notice a drop in pressure, fluid leaks, or difficulty achieving stall pressure, inspect the O-ring. Always replace the O-ring whenever the component it seals is removed or during a pump rebuild. Lightly lubricate the O-ring with a compatible seal lubricant or a small amount of sprayable material to prevent pinching and ensure proper seating.

Frequently Asked Questions

Quick answers for confirming fitment, function, and replacement timing.

Common Questions
What is the TITAN 50504 O-Ring used for?

It is an O-ring used to seal connections in the fluid section or manifold of SprayTECH EP-series sprayers, preventing fluid bypass and maintaining pressure.

Which sprayer models use the 50504?

It is compatible with SprayTECH EP2300 SE, EP2300, EP2400, and EP2510 models, as listed in the official EP2300 service manual.

When should the O-ring be replaced?

Replace if there is pressure loss, fluid leakage around the sealed joint, the O-ring is flattened or hardened, or during any pump rebuild.

Should the O-ring be lubricated during installation?

Yes, it is recommended to lightly lubricate the O-ring with a compatible seal lubricant or a small amount of sprayable material to prevent pinching and ensure proper seating.

What related parts should be inspected during replacement?

Inspect the retainer ring, pump packings/seals, manifold components, and valve seats/balls for wear or damage.

No reviews yet. Be the first to review this product!

Added to cart

Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart