Titan 490-006 Fitting

Titan Fluid Connection Replacement Component

Titan 490-006 Fitting Carbon Steel Connector for Airless Sprayers

Titan 490-006 is an OEM straight fitting engineered to join fluid or air lines in compatible Titan airless spray systems. This connector features a 3/8 NPTF male thread on one end and a 1/4 NPTF male thread on the other, making it a versatile solution for extending hose lengths, adjusting connection angles, or adapting manifold-to-manifold configurations. Manufactured from high-quality carbon steel with a specialized corrosion-resistant coating, the 490-006 is built to withstand the pressures and chemical exposure of professional spraying environments. The fitting weighs approximately 0.08 lb and is made in the USA. Over time, fittings can become damaged from overtightening, thread wear, or corrosion. A compromised fitting can cause fluid or air leaks, pressure loss, and unsafe operating conditions. The 490-006 is verified as compatible with an extensive range of models, including the 1100 XC Airless Sprayer, 1200 GXC, Elite E15, E55, and G40, as well as the Epic 690 GX and 1200 HPG. It is commonly serviced alongside hoses, tubing, thread sealant, and mating port threads. When installing, use appropriate thread sealant if required and tighten to the recommended torque. Always verify fitment against your specific model's parts diagram before ordering.

When servicing the 490-006 Fitting, relieve system pressure before disconnecting. Inspect threads for damage or debris before installation. Apply appropriate thread sealant if required and tighten to the recommended torque. Check mating hoses and port threads for wear or damage. Always verify fitment against your specific model's parts diagram before ordering.