Titan part 441-017 is a Tee Fitting with 1/2" x 5/8" T x 1/2" F configuration designed for fluid line connections in compatible Titan sprayer systems. This brass tee fitting allows for branching or combining fluid lines in the sprayer's plumbing system. The specific size configuration indicates it accommodates different diameter connections for versatile plumbing applications in professional spray equipment.
| Part Number | 441-017 |
|---|---|
| Part Description | Tee, 1/2" X 5/8" T X 1/2" F |
| Brand | Titan |
| Fits | 0528925N 2000-4000, Hydra M, Hydra Pro Super, Hydra Pro 2000-4000 |
| Condition | New |
The Titan 441-017 Tee Fitting with 1/2" x 5/8" T x 1/2" F configuration is a specialized plumbing component designed for Titan Hydra series sprayers and compatible systems. This brass tee fitting allows for the branching or combining of fluid lines within the sprayer's hydraulic system. The unique size configuration (with one 5/8" leg and two 1/2" legs) accommodates different diameter connections commonly found in professional spray equipment plumbing.
Tee fittings in sprayer systems serve critical functions in fluid management, including distribution to multiple outlets, pressure gauge connections, or bypass configurations. A damaged or leaking tee fitting can cause pressure loss, fluid leaks, or improper system operation. This OEM fitting is manufactured to precise specifications for thread pitch, sealing surfaces, and pressure rating to ensure reliable performance in high-pressure spraying applications.
When installing tee fittings, ensure threads are clean and undamaged. Use appropriate thread sealant (Teflon tape or pipe dope) compatible with spray materials. Tighten securely but avoid over-tightening which can damage threads or crack the fitting. After installation, pressure test the system at low pressure before full operation to check for leaks.
| Configuration | 1/2" x 5/8" T x 1/2" F (Female threads on all ports) |
|---|---|
| Material | Typically brass for corrosion resistance and durability |
| Pressure rating | Rated for spray system operating pressures |
| Thread type | NPT (National Pipe Thread) standard for secure connections |
| Fluid distribution | Branches single flow into multiple directions or combines flows |
|---|---|
| Gauge connections | Provides tap for pressure gauge installation |
| System access | Allows for additional system components or accessories |
| Plumbing flexibility | Enables custom plumbing configurations in spray systems |
Titan part 441-017 is designed for multiple Titan Hydra series sprayer models and compatible systems. The specific size configuration makes it suitable for plumbing applications where different diameter connections are required within the same fitting. This tee is used in various locations within the fluid systems of these professional sprayers.
| Compatible Models/Systems | Series/Type |
|---|---|
| 0528925N (2000-4000 models) | Specific pump/assembly part number range |
| Hydra M | Hydra M Series |
| Hydra Pro Super | Hydra Pro Super Series |
| Hydra Pro 2000-4000 | Hydra Pro 2000-4000 Series |
Tee fittings in spray systems should be replaced when they show signs of wear or damage that could compromise system integrity:
Stripped, crossed, or damaged threads that won't seal properly.
Visible cracks or persistent leaks that can't be sealed.
Severe corrosion that weakens the fitting or blocks flow passages.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
