Part number 424-226 is a Cable Mounting Clamp used in various PowrLiner models including 4500, 4000, 3100, 4900 XLT, 4950, 5000, 6000, 6900 XLT, 6950, 800, 8900 XLT, 3000, 3500S (Suffixed Unit), 3500 72v (Honda GXE), 5500, 4955, 6955, and 8955. This clamp secures control cables, wiring harnesses, or hydraulic lines to the machine frame, preventing chafing, vibration, and disconnection. Replacing a broken, corroded, or missing cable mounting clamp ensures proper cable routing and reliable operation of controls.
| Part Number | 424-226 |
|---|---|
| Part Description | Cable Mounting Clamp |
| Brand | PowrLiner |
| Fits | 4500, 4000, 3100, 4900 XLT, 4950, 5000, 6000, 6900 XLT, 6950, 800, 8900 XLT, 3000, 3500S (Suffixed Unit), 3500 72v (Honda GXE), 5500, 4955, 6955, and 8955. |
| Condition | New |
The 424-226 Cable Mounting Clamp is a simple yet essential component used across multiple PowrLiner line striper models. It is designed to securely fasten control cables, electrical wiring, or hydraulic lines to the machine's frame or designated mounting points.
Proper cable routing and secure mounting are critical for safe and reliable machine operation. These clamps prevent cables from dangling, chafing against moving parts, or becoming snagged on obstacles. They also reduce vibration and wear on cable sheaths and connectors. A missing, broken, or corroded clamp can lead to cable damage, intermittent control response, or complete failure of critical functions. Replacing it restores secure cable retention and prolongs the life of expensive cables and hoses.
| Cable retention | Secures cables, wires, or hoses to the machine frame |
|---|---|
| Abrasion protection | Prevents chafing against moving parts or sharp edges |
| Vibration dampening | Reduces cable movement and fatigue from vibration |
| Broken / cracked | Clamp is fractured and no longer holds securely |
|---|---|
| Corroded | Rust or chemical damage has weakened the clamp |
| Missing | Clamp absent, allowing cables to move freely |
| Worn / oversize | Clamp no longer grips cable tightly |
Part number 424-226 is compatible with the following PowrLiner models. Always confirm fitment using the correct parts diagram for your exact model and revision.
| PowrLiner Model | Component |
|---|---|
| PowrLiner 4500 | Cable Mounting Clamp |
| PowrLiner 4000 | Cable Mounting Clamp |
| PowrLiner 3100 | Cable Mounting Clamp |
| PowrLiner 4900 XLT | Cable Mounting Clamp |
| PowrLiner 4950 | Cable Mounting Clamp |
| PowrLiner 5000 | Cable Mounting Clamp |
| PowrLiner 6000 | Cable Mounting Clamp |
| PowrLiner 6900 XLT | Cable Mounting Clamp |
| PowrLiner 6950 | Cable Mounting Clamp |
| PowrLiner 800 | Cable Mounting Clamp |
| PowrLiner 8900 XLT | Cable Mounting Clamp |
| PowrLiner 3000 | Cable Mounting Clamp |
| PowrLiner 3500S (Suffixed Unit) | Cable Mounting Clamp |
| PowrLiner 3500 72v (Honda GXE) | Cable Mounting Clamp |
| PowrLiner 5500 | Cable Mounting Clamp |
| PowrLiner 4955 | Cable Mounting Clamp |
| PowrLiner 6955 | Cable Mounting Clamp |
| PowrLiner 8955 | Cable Mounting Clamp |
When replacing a cable mounting clamp, these components are often inspected or replaced at the same time to ensure complete cable system reliability.
Inspect cables for fraying, kinking, or sheath damage; replace if worn.
Bolts, nuts, or screws may be corroded; replace if necessary.
Check for wear that could affect cable movement and life.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
