Titan 290623 Line Stripers Spray Shield
TITAN WINDGUARD LINE STRIPING ACCESSORY
Titan 290623 WindGuard Spray Shield helps protect line-striping spray patterns from wind and minimize overspray. Its spring-loaded shields adjust for 4-, 6-, or 8-inch line widths and attach to Titan PowrLiner stripers for cleaner professional marking.
Titan specifies the WindGuard for any Titan PowrLiner and most competitive line-striping models. It is especially useful when applying diluted athletic-field marking paints, while its spring-loaded shields accommodate uneven surfaces and allow quick line-width changes.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 290623, also documented as 0290623, is the WindGuard Spray Shield accessory for professional line-striping equipment. It surrounds the active spray area to help protect the spray pattern from wind and minimize unwanted overspray during pavement and field-marking applications. |
| Function | The WindGuard places physical shields beside the spray pattern to reduce the effect of crosswind on atomized coating. Its adjustable design supports 4-, 6-, and 8-inch line-width settings, allowing operators to make line-width changes on the fly without changing to a different spray-shield assembly. |
| Industrial Applications | Designed for professional line striping and field marking where wind can disturb the spray pattern or increase overspray. Titan specifically notes that the WindGuard works well when applying diluted athletic-field marking paints. It can also support compatible pavement-marking operations where overspray control is important. |
| Accurate Compatible Titan Machines | Titan states that the WindGuard Spray Shield attaches to any Titan PowrLiner and most competitive line-striping models. Current Titan PowrLiner families include machines such as the PowrLiner 855, 3500, 3500S, 3500 72V, 5500, 4955, 6955 and other professional PowrLiner configurations. Installation setup should follow the applicable machine and accessory instructions. |
| Accurate Part Number | Titan 290623 — WindGuard Spray Shield. Earlier Titan accessory literature commonly displays the number as 0290623, while current Titan PowrLiner accessory documentation lists 290623. Both references identify the WindGuard Spray Shield line-striping accessory. |
| Compatible Parts & Assemblies | The WindGuard works around the line striper's spray-gun and tip-pattern area rather than replacing the gun, tip or guard. Its adjustable shield assembly supports 4-, 6-, and 8-inch line widths. Titan's design uses spring-loaded shields to provide additional forgiveness when the machine travels across uneven surfaces. |
| Related Parts Commonly Serviced Together | When inspecting the WindGuard, also check the line-striping gun mounting position, spray tip, tip guard, gun holder and related mounting hardware. Confirm that the shields move correctly, remain securely attached and are positioned for the intended stripe width without interfering with the spray pattern. |
| Common Problems Solved | Helps address wind-distorted spray patterns and excessive overspray around the intended stripe. The adjustable shield spacing reduces the need for separate shield assemblies when changing among 4-, 6-, and 8-inch line widths, while spring-loaded shields provide greater tolerance when striping across irregular or uneven surfaces. |
| Use with Coating Systems | Designed for line-striping and field-marking spray applications. Titan specifically recommends the WindGuard as useful with diluted athletic-field marking paints. Coating compatibility, spray-tip selection, operating pressure and filtration remain dependent on the line striper, spray gun and coating being applied. |
| OEM & Brand Information | 290623 is a genuine Titan Tool WindGuard line-striping accessory. Titan lists the WindGuard within its professional PowrLiner accessory range and describes it as a spray-pattern protection system designed to minimize overspray caused by wind. The complete accessory weighs approximately 5.5 lb. |
| Commercial Benefits | Cleaner stripe edges and reduced wind-driven overspray can help contractors improve marking quality and reduce unnecessary coating outside the intended pattern. One adjustable accessory handles three common line widths, attaches across the Titan PowrLiner range, removes easily and weighs only 5.5 lb for practical jobsite use. |
Contractor Selection Insight
Choose Titan 290623 when wind and overspray are making it difficult to maintain a controlled line-striping pattern. The WindGuard is particularly valuable for diluted athletic-field marking paint and jobs requiring frequent changes between 4-, 6-, and 8-inch lines. Its spring-loaded shields are also useful on uneven surfaces. This accessory controls the area around the spray pattern; it does not replace proper tip selection, pressure adjustment or gun-height setup.
FAQ Section
Key answers for contractors selecting the Titan 290623 WindGuard Spray Shield.
No reviews yet. Be the first to review this product!