Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 2440408 Filter 100 Mesh

Titan 2440408 Filter 100 Mesh

Sourced From:
Titan Tools Inc.

 

Titan part 2440408 is a 100 mesh filter used to strain paint and coating materials on compatible Impact X airless sprayers. This direct‑replacement filter captures fine particles to protect the spray tip and ensure a smooth, consistent finish.

Part Number 2440408
Part Description Filter – 100 Mesh
Brand Titan
Fits
  • Impact X 410, 440, 540I
Condition New

$17.1

 

100 Mesh Filter for Titan Impact X Sprayers

The Titan 2440408 100 Mesh Filter is a genuine OEM replacement filter element designed for the fluid filtration system on Impact X 410, 440, and 540I airless paint sprayers. Its 100‑mesh opening size captures fine particles, dried paint skins, and debris that can clog spray tips or mar finishes.

A clogged or damaged filter reduces paint flow, causes pressure fluctuations, and leads to frequent tip blockages. Replacing the filter at recommended intervals ensures consistent spray performance and protects the pump and tip from contamination.

Service Guidance: Inspect the filter before each use. Clean with a soft brush and compatible solvent if lightly soiled. Replace immediately if torn, crushed, or heavily clogged. Always use the correct 100 mesh specification for these Impact X models.

What it does and when to replace it

What the 100 mesh filter does
Fine particle filtration Captures particles larger than 100 mesh (approx. 150 microns)
Tip protection Prevents clogging of fine finish spray tips
Finish quality Removes debris that could cause surface defects
When replacement is recommended
Clogged filter Reduced flow or difficulty priming, visible debris buildup
Torn or damaged mesh Holes allow unfiltered material to pass through
Frequent tip clogs Even after cleaning, tips block repeatedly
After spraying heavy solids Replace filter following use of textured or high‑build coatings

Compatibility

Titan 2440408 is compatible with the following Impact X models. Always confirm fitment using the parts diagram for your specific machine.

Brand / Model Component
Impact X 410 100 Mesh Filter
Impact X 440 100 Mesh Filter
Impact X 540I 100 Mesh Filter

Related parts commonly serviced together

When replacing the 100 mesh filter, these associated components are often inspected or serviced at the same time.

Filter housing / cap

Inspect the filter bowl and cap for cracks, damaged threads, or missing O‑rings that could cause leaks.

Inlet screen (coarse)

Many Impact X models have a primary inlet screen; clean or replace if large debris is present.

Spray tip & guard

If debris passed through a damaged filter, inspect and clean the tip assembly.

Frequently Asked Questions

It is a 100 mesh filter element for Titan Impact X 410, 440, and 540I airless sprayers. It traps fine particles to protect the spray tip and ensure a smooth finish.

100 mesh means approximately 150 micron openings. It captures fine debris such as dried paint specks, fibers, and sediment while allowing most paint pigments and binders to pass through.

Inspect the filter before each job. Clean with solvent if lightly soiled. Replace if torn, crushed, or if cleaning does not restore flow. For professional use, replacement every 1‑3 months is typical, or sooner when spraying high‑solids materials.

Titan specifies 100 mesh for optimal flow and protection on these Impact X models. A coarser mesh (e.g., 60 mesh) may allow damaging particles to reach the tip. A finer mesh (e.g., 200 mesh) may restrict flow and cause cavitation. Always use genuine 2440408.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods